In present paper we report the fabrication process of a high-temperature SAW-sensor based on a langasite crystal. Interdigital transducers of the SAW-resonator structures were fabricated from Ir which was evaporated using magnetron sputtering technique. The SAW-sensors were designed with different coefficient of metallization of an IDT, which strongly influences on the value of the SAW velocity and resonance excitation frequency, respectively. The process of the SAW excitation was investigated using high-resolution X-ray diffraction techniqu
High-quality Ca3TaGa3Si2O14 single crystals with dimensions of 80 × 50 × 95 mm3 were synthesized using the Czochralski method from a crucible with a diameter of 120 mm. X-ray diffraction and topo-graphy methods were used to study the degree of structural perfection of the obtained crystal along the Y growth axis and to visualize the defect structure on the YZ section. The results demonstrate high quality of the obtained crystal and the absence of significant stresses in it. The growth bands and their location are typical for crystals of the langasite family.