Direct integration of a metallic lithium anode with the ceramic Li1.3Al0.3Ti1.7(PO4)3 (LATP) electrolyte into an all-solid-state battery is highly challenging due to their chemical and electrochemical incompatibility. Herein, a layered hybrid solid electrolyte is designed by coating the ceramic LATP electrolyte with a protective polymer electrolyte, polyphosphazene/PVDF-HFP/LiBOB. This polymer electrolyte comprises highly Li+ conductive polyphosphazene and mechanically stable PVDF-HFP as the polymer matrix, and the mobile lithium ions in the polymer layer are supplied by LiBOB. Equipped with both polymer and ceramic components, the hybrid electrolyte possesses favorable features, such as a flexible surface, high ionic conductivity, high chemical stability against lithium and wide electrochemical stability window (4.7 V), which all to help realize its application in all-solid-state lithium batteries. The prepared all-solid-state battery with a metallic lithium anode and high-voltage Li3V2(PO4)3/CNT cathode shows high capacity and excellent cycling performance with negligible capacity loss over 500 cycles at 50 °C. Furthermore, the analysis of the hybrid solid electrolyte after long-term cycling demonstrates outstanding electrode/electrolyte interfacial stability. This study suggests that use of solid organic–inorganic hybrid electrolyte is a promising approach to circumvent the mechanical, chemical and electrochemical limitations at the interface of electrodes and ceramic electrolyte for all-solid-state batteries.
21 November 2017 in Angewandte Chemie International Edition
Non‐aqueous Li–O2 batteries are promising for next‐generation energy storage. New battery chemistries based on LiOH, rather than Li2O2, have been recently reported in systems with added water, one using a soluble additive LiI and the other using solid Ru catalysts. Here, the focus is on the mechanism of Ru‐catalyzed LiOH chemistry. Using nuclear magnetic resonance, operando electrochemical pressure measurements, and mass spectrometry, it is shown that on discharging LiOH forms via a 4 e− oxygen reduction reaction, the H in LiOH coming solely from added H2O and the O from both O2 and H2O. On charging, quantitative LiOH oxidation occurs at 3.1 V, with O being trapped in a form of dimethyl sulfone in the electrolyte. Compared to Li2O2, LiOH formation over Ru incurs few side reactions, a critical advantage for developing a long‐lived battery. An optimized metal‐catalyst–electrolyte couple needs to be sought that aids LiOH oxidation and is stable towards attack by hydroxyl radicals.
10 August 2019 in Journal of Materials Chemistry A
Li/CFx cells possess the highest energy density among all lithium primary batteries. Here, the electrochemical lithiation process is elucidated through high-resolution 19F NMR, in situ7Li NMR and TEM methods. Fluorinated carbon CFL (L is around 0.06 or less) is identified for the first time to be generated in the discharge process of CFx (x ≥ 0.5) besides LiF and carbon. Moreover, the morphological evolution of the formed LiF, which affects the impedance of the battery during discharge, is illustrated as crystal nuclei of LiF, with a size of around 10 nm, which keep forming and growing into crystal grains of LiF, with a size of around 200 nm, until the surface of the CFx particles is saturated by LiF and then both crystal nuclei and grains enlarged promptly towards the end of lithiation. This work reveals the electrochemical reaction mechanism of CFx and provides crucial guidance to enhance the performance of the materials.
29 August 2018 in Journal of Materials Chemistry A
A Na-ion battery with high rate capability and long cycling life consists of high mass loading self-standing NaTi2(PO4)3 anode and Na3V2(PO4)3 cathode.
Li6.4Ga0.2La3Zr2O12 can be reduced by Li, which results in Ga leaching out of the garnet structure to form the Li–Ga alloy. The penetrated alloy can short-circuit the battery when Ga-substituted LLZO is used as a solid electrolyte.