1 October 2024 in AIP Advances
Resin components produced by photocuring technology and 3D printing are commonly utilized as seals across various media owing to their flexible molding, precise structure, and excellent watertightness. Under certain specific conditions, it is necessary to detach the photocurable resin seals from the main body using explosive cord blasting. However, the mechanical performance of photocurable resins under explosive shock loads remains underexplored. This study aimed to explore the mechanisms underlying the destruction of photocurable resins by explosive cords in different environments. We conducted explosive shock experiments on photocurable resin specimens both in air and underwater and employed explicit dynamics software to simulate the damage process of the resin material. The experiments showed that a 10 mm thick specimen in air reached a critical fracture state under the equivalent explosive shock of the explosive cord, leading to adjustments in the constitutive parameters of the photocurable resin model in the simulations. In addition, the JH-2 strength and failure model was applied in AUTODYN explicit dynamics software to characterize the mechanical properties of the resin materials. The fluid–structure interaction method was utilized for modeling and simulating the shock process on photocurable specimens in air and water, clarifying the role of groove shape in the fracture state of the specimens and the failure mechanisms of the photocurable resin materials under explosive shock.
1 April 2026 in AIP Advances
To address the challenge of predicting mass erosion during the penetration of kinetic projectiles into reinforced concrete, this paper proposes a coupled calculation method. This method is based on existing mass erosion theories regarding thermal melting stripping and thermal softening cutting, while simultaneously considering the shear-plastic hinge resistance encountered by the projectile during direct contact with the reinforcement. Solved via multi-scale discretization, this method discretizes the entire penetration process into microsecond-level steps (10−6 s) on a temporal scale and employs micro-scale grid division on the projectile surface layer on a spatial scale. The calculated results show good agreement with experimental data, with a deviation of 2.74% between the predicted and experimental penetration depths for reinforced concrete. The study finds that as the initial penetration velocity increases, the thermal melting mechanism dominates mass loss, although the proportion of mass loss induced by the cutting mechanism exhibits an increasing trend. The presence of reinforcement mitigates the total mass loss of the projectile during the penetration process. Furthermore, the proportions of cutting mass loss, melting mass loss, and total mass loss all demonstrate a decreasing trend as the projectile mass increases. Further analysis reveals the existence of critical thresholds for the projectile’s initial velocity and concrete strength concerning reinforcement protective efficacy; when both exceed these thresholds, the reinforcement’s contribution to the concrete’s anti-penetration protection becomes negligible. The coupled calculation method presented in this paper provides a design basis for optimizing reinforcement and enhancing cost-effectiveness.