30 April 2022 in Eastern-European Journal of Enterprise Technologies
The results of developing post-quantum algorithms of McEliece and Niederreiter crypto-code constructs based on LDPC (Low-Density Parity-Check) codes are presented. With the rapid growth of computing capabilities of mobile technologies and the creation of wireless mesh and sensor networks, Internet of Things technologies, and smart technologies on their basis, information security is becoming an urgent problem. At the same time, there is a need to consider security in two circuits, internal (directly within the network infrastructure) and external (cloud technologies). In such conditions, it is necessary to integrate threats to both the internal and external security circuits. This allows you to take into account not only the hybridity and synergy of modern targeted threats, but also the level of significance (degree of secrecy) of information flows and information circulating in both the internal and external security circuits. The concept of building security based on two circuits is proposed. To ensure the security of wireless mobile channels, it is proposed to use McEliece and Niederreiter crypto-code constructs based on LDPC codes, which allows integration into the credibility technology of IEEE 802.15.4, IEEE 802.16 standards. This approach provides the required level of security services (confidentiality, integrity, authenticity) in a full-scale quantum computer. Practical security technologies based on the proposed crypto-code constructs, online IP telephony and the Smart Home system based on the use of an internal server are considered
31 August 2023 in Eastern-European Journal of Enterprise Technologies
The object of this study is the process of determining the coordinates of low-visible aerial objects. The main hypothesis of the research assumed that the signals emitted by airborne systems of airborne objects that are not visible to radar stations have a greater power than the signal reflected from the airborne object. This, in turn, could improve the signal/noise ratio and, accordingly, the accuracy of determining the coordinates of low-visible aerial objects. It is suggested to use Software-Defined Radio receivers to receive such signals emitted by on-board systems of low-visible aerial objects. It was established that the main sources of signals for Software-Defined Radio receivers are signals of command, telemetry, target channels, manual control channels, and satellite navigation. It was established that an additional distinguishing feature when determining the coordinates of low-visible aerial objects is the uniqueness of their spectra and spectrograms. The method of determining the coordinates of low-visible aerial objects when using Software-Defined Radio receivers has been improved, which, unlike the known ones, involves: – the use as signals for Software-Defined Radio of signal receivers of on-board equipment of low-visible aerial objects; – the use of a priori coordinate values of a low-visible aerial object; – conducting additional spectral analysis of signals of on-board systems of low-visible aerial objects. The spectra and spectrograms of signals of on-board systems of aerial objects when using non-directional and directional antennas were experimentally determined. The experimental studies confirm the possibility of using the Software-Defined Radio receiver to receive signals from airborne equipment and improve the signal-to-noise ratio. The accuracy of determining the coordinates of aerial objects when using Software-Defined Radio receivers was evaluated. A decrease in the error of determining plane coordinates by the Software-Defined Radio system of receivers compared to the accuracy of determining coordinates by the P-19 MA radar station was established by an average of 1.88–2.47 times, depending on the distance to the aerial object
31 October 2021 in Eastern-European Journal of Enterprise Technologies
This paper reports an experimental study aimed at confirming disruptions in the operation of ADS-B receivers. The experimental investigation into disruptions in the operation of ADS-B receivers involved the FlightAware Piaware receiver. Examples of the disrupted performance of ADS-B receivers are given. It was found that the experimentally detected disruptions in the operation of ADS-B receivers could lead to a decrease in the accuracy of determining the coordinates of air objects with the joint use of the radar and multilateration technology. A method for determining the coordinates of an air object by radar with additional use of multilateration technology has been devised. The method involves the following stages: entering initial data, the calculation of distances between the points of reception and the air object, the computation of the inconsistency vector, the calculation of the matrix of partial derivatives taking into consideration the estimates of the coordinates of an air object at the previous iteration, the computation of the correction, the calculation of the refined coordinates of the air object. Unlike those known ones, the improved method for determining the coordinates of an air object by a radar additionally uses multilateration technology. The accuracy of determining the air objects' coordinates by a radar with the additional use of multilateration technology was estimated. It was established that the additional application of multilateration technology would reduce the error in determining the coordinates of an air object by 1.58 to 2.39 times on average, compared to using only an autonomous radar
1 January 2024 in Cybersecurity: Education, Science, Technique
A brief overview of the technological processes of the critical infrastructure of the NPP power unit with the VVER-1000 type reactor is given using the example of power units 1 and 2 of the South Ukrainian NPP. The purpose of this article is to study the organization of power unit management in different modes, to analyze the structure and volume of information provided to operational personnel from the information and control system, digital software and technical complexes, and other systems, as well as to analyze the complexity of the technological regulations by which management takes place NPP power unit. The object of the research is the process of information support and technological regulations, according to which the power unit of the NPP is managed. The subject of the study is the intensity and complexity of the decision-making processes by the operational staff of the NPP when managing the power unit. The following tasks were solved in this work: The organization of the power unit management process was studied; The main information and control systems and software and technical complexes of the power unit were considered, as well as means of their interaction with operational personnel; The information model, which is used by operational personnel in managing the power unit, is considered. For this purpose, the indicators of the information model, which is used by operational staff to make decisions when managing the power unit, were determined and the volume of control bodies with which the operational staff interacts to manage the power unit was determined. The structure of technological regulations and instructions for power unit management was analyzed and the volume and complexity of these documents were determined; The expediency of research on improving NPP power unit management processes has been determined, namely: in the direction of further research, support systems for operational personnel, their classification, functions and experience of application at NPPs of Ukraine will be considered, with the aim of determining the actual design directions of such systems. It is necessary to determine which support systems have been implemented or are being developed at the present time, which difficulties arise for the operational staff during the management of the power unit, and which of them can be solved with the help of support systems.
1 January 2025 in Cybersecurity: Education, Science, Technique
This article develops a logical-structural model of a computer-oriented procedure for normal operation and elimination of violations for the support system for NPP operational personnel. The purpose of this study is to create a model of a computer-oriented procedure, the data structures of which will comply with technological regulations and instructions for NPP operational personnel and contain information about the relationship between states and steps of procedures. The object of the study is the process of forming computer-oriented procedures for controlling a NPP power unit. The subject of the study is logical-structural models of computer-oriented procedures and methods for identifying states and steps of procedure execution based on production rules. The following tasks were solved in this study: the data structure of the computer-oriented procedure model was developed, which complies with current regulations and instructions; a logical-structural model of a computer-oriented procedure was created, which will be used to create support systems for NPP operational personnel; A method for identifying the conditions for entering the procedure and performing its steps has been developed. The model is designed to solve the problem of maintaining relevance, early identification of the states of the power unit and its equipment, ensuring the possibility of obtaining information about the state of technological parameters with the required level of reliability and accuracy. The proposed model can be used to create support systems for operational personnel managing complex technological facilities using specific procedures and instructions.