21 December 2023 in Applied Optics
We design a broadband free space 2×4 90° optical hybrid over a spectral window of 1000–1200 nm and 1470–1650 nm and verify the feasibility of the scheme experimentally. The hybrid consists of three broadband polarization beam splitters, an achromatic λ/4 wave plate, and three achromatic λ/2 wave plates. The fabricated hybrid exhibits a good quadrature phase response with an interchannel imbalance of 0.93–1.07 and a low phase deviation of less than 0.2° under the typical communication wavelengths of 1064 nm and C-band. The experimental results of the heterodyne method show that the proposed hybrid can effectively solve the wavelength incompatibility problem in satellite laser communication and realize interconnection at different wavelengths. The designed hybrid (without coupling) has a measured insertion loss of no more than 7.34 dB at 1064 nm and C-band. A high-speed transmission experiment with BPSK format has been conducted to verify the performance of the assembled device.
26 September 2024 in Applied Optics
Micro electromechanical systems (MEMS) optical phased arrays are distinguished by their ability to achieve a large steering angle and high optical gain, which makes them well-suited for space laser communication. However, there are pointing errors between the beams of each array element due to mounting inaccuracies or the need for precision of the MEMS. This will lead to a decrease in the combined beam power, which in turn affects the quality of communication. Therefore, this paper analyzes the effect of pointing errors on combined beam power in MEMS optical phased arrays. Based on the reflective diffraction of a Gaussian beam after the MEMS, the theoretical expressions for the far-field beam power in the presence of pointing errors are derived. The above expressions are then subjected to simulation and analysis. Finally, the system is built for experimental validation. The result shows that the discrepancies between the measured and simulated results are only 5.25%, 4.48%, and 2.79% for the number of array elements 2×2, 4×4, and 8×8, respectively. This paper could provide a valuable reference to the accuracy requirements of MEMS for practical applications of MEMS optical phased arrays.