12 July 2018 in Nature Communications
Fundamentally, material flow stress increases exponentially at deformation rates exceeding, typically, ~103 s−1, resulting in brittle failure. The origin of such behavior derives from the dislocation motion causing non-Arrhenius deformation at higher strain rates due to drag forces from phonon interactions. Here, we discover that this assumption is prevented from manifesting when microstructural length is stabilized at an extremely fine size (nanoscale regime). This divergent strain-rate-insensitive behavior is attributed to a unique microstructure that alters the average dislocation velocity, and distance traveled, preventing/delaying dislocation interaction with phonons until higher strain rates than observed in known systems; thus enabling constant flow-stress response even at extreme conditions. Previously, these extreme loading conditions were unattainable in nanocrystalline materials due to thermal and mechanical instability of their microstructures; thus, these anomalies have never been observed in any other material. Finally, the unique stability leads to high-temperature strength maintained up to 80% of the melting point (~1356 K).
27 December 2017 in Materials Research Letters
The presence of complex states-of-stress and strain-rates directly influence the dominant deformation mechanisms operating in a given material under load. Mg alloys have shown limited ambient temperature formability due to the paucity of active slip-mechanisms, however, studies have focused on quasi-static strain-rates and/or simple loading conditions (primarily uniaxial or biaxial). For the first time, the influence of strain-rate and stress-triaxiality is utilized to unravel the active deformation mechanisms operating along the rolling, transverse- and normal-directions in wrought AZ31-alloy. It is discovered that the activation of various twin-mechanisms in the presence of multiaxial loading is governed by the energetics of the applied strain-rates. IMPACT STATEMENT It is shown for the first time that the higher deformation energy associated with dynamic strain-rates, coupled with high-triaxiality, promotes detwinning and texture evolution in HCP alloys with high c/a ratio. GRAPHICAL ABSTRACT
1 December 2017 in Scripta Materialia
1 May 2018 in Materials Science and Engineering: A