27 April 2021 in Bulletin of the Seismological Society of America
Ground‐motion models (GMMs) are developed for peak ground displacement (PGD) and for bandlimited PGD based on strong‐motion data that has been filtered as part of standard processing and the total PGD that includes the tectonic deformation as well as the vibratory ground motion. For the bandlimited PGD, we develop conditional ground‐motion models (CGMMs) using subsets of the Pacific Earthquake Engineering Research Center Next Generation Attenuation‐West2 Project (NGA‐W2) database and the National Center for Research on Earthquake Engineering Taiwan Senior Seismic Hazard Analysis Committee level 3 project database. The CGMM approach includes the observed pseudospectral acceleration ( ) as an input parameter in addition to magnitude and distance. The period of the is used as an input parameter; it is magnitude dependent and is based on the period for which there is the highest correlation between the and . Two CGMMs are developed: a global model based on the NGA‐W2 data and a region‐specific model for Taiwan. The conditional PGD models are combined with traditional GMMs for values to develop GMMs for both the median and standard deviation of PGD without the dependence on PSA. A second set of PGD GMMs are developed to correct for two factors: the effect of the high‐pass filtering from standard record processing and the stronger large magnitude ( ) scaling due to tectonic deformation. For magnitudes greater than 7, the PGD values from the total PGD GMMs are 2–5 times larger than the bandlimited PGD values based on the strong‐motion data sets, but the increase is at very long periods. The appropriate PGD model to use, bandlimited PGD or total PGD, depends on the period range of interest for the specific engineering application.
26 April 2024 in Seismological Research Letters
New global source-scaling relations for the aspect ratio and rupture area for crustal earthquakes that include the width-limited effect and a possible free-surface effect are derived using a global dataset of finite-fault rupture models. In contrast to the commonly used scaling relations between moment magnitude (M), fault length (L), width (W), and area, we built self-consistent scaling relations by relating M to the aspect ratio (L/W) and to the fault area to model the change in the aspect ratio once the rupture width reaches the down-dip width limit of the fault. The width-limited effect of large-magnitude earthquakes depends on the fault dip and a regional term for the seismogenic thickness. The magnitude scaling of the aspect ratio includes a break in the magnitude scaling that is dip angle dependent. This dip angle-dependent magnitude scaling in the magnitude–area relation is modeled by a trilinear relation incorporating a dip-related transition range. The effect of the free surface was observed using a normalized depth term and parameterizing the source by the depth of the top of the fault rupture; it is more apparent in the area scaling relation. The scaling differences are related to the fault geometry, not to the rake angle, as commonly assumed. Finally, the corresponding L and W scaling relations obtained by converting the area and aspect ratio models to L and W models not only show good agreement with the previous regional scaling laws on average but also provide better fault-specific application due to the inclusion of a fault-specific dip angle and seismogenic thickness.
1 August 2021 in Soil Dynamics and Earthquake Engineering
5 December 2023 in Earthquake Engineering & Structural Dynamics
13 February 2023 in Bulletin of the Seismological Society of America
Most ground‐motion models (GMMs) parameterize the earthquake source by magnitude, style of faulting, and source depth. GMMs are isotropic in terms of the source scaling for these three parameters. The radiation pattern, which leads to azimuthally varying source effects, is not included in most GMMs. As a result, any systematic radiation‐pattern effects are treated as aleatory variability in the path terms in the GMMs, which does not make physical sense. We incorporate the far‐field radiation pattern into GMMs for pseudospectral acceleration and Fourier amplitude spectra for the Taiwan region. A key issue is how to combine the radiation pattern from the SH and SV components for predicting the RotD50 amplitudes of ground motions used in GMMs. A suite of point‐source simulations was generated for a range of focal mechanisms and site azimuths. Empirical models for the phase differences between the radial and transverse components were developed to constrain the between‐component phase differences in simulations. The results show that the vector sum of the SH and SV far‐field radiation patterns, , has a higher correlation with the RotD50 amplitudes of the ground motion than the arithmetic mean or the geometric mean. The radiation‐pattern term is modeled by , in which and are linear functions of magnitude between M 4 and 6; they equal 0 for M > 6. The magnitude dependence reflects that, for large magnitudes and short distances, ground motions are more affected by the slip distribution and rupture timing than by the average radiation pattern from the subevents along the rupture, but the radiation pattern has a significant effect on the long‐period ground‐motion amplitude for small‐magnitude events. Including radiation patterns into GMMs will improve estimates of 3D path effects from small‐magnitude events by removing radiation‐pattern effects from combined radiation‐pattern and path terms used in current GMMs.
12 August 2023 in Earthquake Spectra