29 January 2021 in IEEE Antennas and Wireless Propagation Letters
Although the 60 GHz band meets the higher data rate demands for various wireless applications, large path losses and small size of 5 mm free-space wavelength makes the design, fabrication, packaging, and measurement of 60 GHz antenna arrays challenging. In this letter, we present a low-cost and high-efficiency patch antenna array fabricated using a printed circuit board (PCB) process. As the mini-connector size is larger than unit-cell at 60 GHz, it poses challenges for separate feeding for each array element. This optimized configuration not only addresses the mini-connector assembly shortcoming for off-chip antenna measurements in a laboratory environment but also permits future direct flip-chip integration on a transceiver. Embedded thin-film resistors are first used to fabricate 50 Ω termination and calibration elements on the same board, thus removing associated lossy and bulky external loads and calibration kit. Next, a highly precise robotic antenna measurement system is used to complete the challenging task of measuring far-field pattern at 60 GHz. The proposed 5×5 antenna array is matched at 60 GHz with the -10 dB bandwidth of 3.6 GHz (6%). The peak realized gain of the 5×5 array is 18.5 dBi, and the measured boresight efficiency is 85% at 60 GHz. Furthermore, the simulated maximum scanning volume is ±40° in the E-plane and ±45° in the H-plane. Therefore, the proposed 60 GHz antenna array maintains a low-cost, high-efficiency moderate scanning range with a potential for easy on-chip integration for future communication and sensing applications.
26 January 2021 in IEEE Antennas and Wireless Propagation Letters
A major shortcoming of current silicon-based millimeter-wave (mmWave) on-chip antennas is the low radiation efficiency (<; 50%). In this letter, we present a novel on-chip antenna array with the radiation efficiency >80% at 60 GHz. The proposed array addresses the issues of on-chip air-suspension using micro electro mechanical systems (MEMS) processes, thus elevating the hovering radiating elements on a substrate at the height of 35 μm (0.007 λ 0 ). The micofabricated SU-8 posts serve as the vertical support, ensuring mechanical stability and monolithic integration. The simulated -10 dB fractional bandwidth of this array is 5.5% or 3.4 GHz at 60 GHz. Further, the designed array is capable of scanning of ±55° in the E plane and ±58° in the H-plane. The noncontact backscattering method is proposed and employed to derive the radiation efficiency from measured radar cross-section (RCS) data. RCS measurements are performed using a precision six-axis robotic arm with the spatial repeatability of 20 μm (λ 0 /250). The measured radiation efficiency is 82% at 60 GHz. The measured peak gain of 9 × 9 array is 23.3 dBi versus simulated 23.6 dBi. Fundamental enhancement in suspended array efficiency is achieved by eliminating unwanted radiation in the silicon substrate. Compared to other on-chip integration approaches, the proposed array can be monolithically integrated on a silicon substrate while maintaining high radiation efficiency.
31 December 2020 in Microwave and Optical Technology Letters