Shangyi Chen

Dr. Shangyi Chen

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 May 2020 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
MLMark Lust
Mark Lust
SCShangyi Chen
Shangyi Chen
CWCatrina E. Wilson
Catrina E. Wilson
JAJoshua Argo
Joshua Argo
VDVicky Doan-Nguyen
Vicky Doan-Nguyen
NGNima Ghalichechian
Nima Ghalichechian
We present vanadium dioxide (VO2) thin films having high resistivity contrast with silicon substrates through use of crystallized alumina (Al2O3) buffer layers, engineered for this purpose. We first optimized the process by depositing VO2 onto C-plane sapphire substrates prior to alumina thin films. The latter of which were grown via atomic layer deposition on silicon substrates. We then applied rapid thermal annealing (RTA) to crystallize the alumina films. Scanning electron microscopy results indicated a thickness of 107 nm for each VO2 film, which yielded hot–cold resistivity contrast ratios of 9.76 × 104, 1.46 × 104, and 3.66 × 103, when deposited on the C-plane sapphire, the annealed buffers, and the as-deposited alumina buffers, respectively. Atomic force microscopy of the film surface roughness of the VO2 films indicated root mean squared roughness (Rq) of 4.56 nm, 6.79 nm, and 3.30 nm, respectively, for the films grown on the C-plane sapphire, annealed buffers, and as-deposited buffers. Finally, x-ray diffraction (XRD) of the VO2 films indicated the desired composition and strong (0h0)/(00h) texturing, when deposited on both the C-plane sapphire and the annealed alumina buffer layers. XRD results indicated a series of peaks corresponding to the α-Al2O3/C-plane sapphire, and an XRD analysis of the buffers alone confirmed crystallization of the buffer layer via RTA. The process defined in this paper produced a series of highly textured VO2 films making them most valuable for the integration of VO2 with silicon-based devices.

27 February 2023 in IEEE Transactions on Device and Materials Reliability
Verified
Journal Article
Closed access
SCShangyi Chen
Shangyi Chen
MLMark Lust
Mark Lust
ARAnnie Roo
Annie Roo
NGNima Ghalichechian
Nima Ghalichechian
We report the lifetime investigations of the reversible phase transition vanadium dioxide (VO2) thin film switches integrated with coplanar waveguide (CPW) under fast and direct thermal cycling. We observe that after 100 million thermal cycles, there is no degradation in the performance of VO2 shunt switches operating at 35 – 45 GHz. S11 reflection coefficient as well as S21 transmission measurements (verified independently at both activated and inactivated states) show no statistical difference in port-to-port coupling of the VO2 switch as a function of a cycle number. This study is enabled by the integration of Joule heaters on chip at a close proximity to a shunt VO2 switch and a metallic CPW transmission line. Full-wave electromagnetic and multiphysics electrothermal finite element simulations are conducted to analyze the feasibility of the CPW design and the required time and power for thermal cycling. On-wafer mmWave measurements are carried out on the test vehicle after each thermal cycling phase.

18 September 2023 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
YHYunfei He
Yunfei He
SCShangyi Chen
Shangyi Chen
MFMerrilyn Mercy Adzo Fiagbenu
Merrilyn Mercy Adzo Fiagbenu
CLChloe Leblanc
Chloe Leblanc
PMPariasadat Musavigharavi
Pariasadat Musavigharavi
DJDeep Jariwala
Deep Jariwala
This Letter presents oriented growth and switching of thin (∼30 nm) co-sputtered ferroelectric (FE) aluminum scandium nitride (AlScN) films directly on degenerately doped 4H silicon carbide (SiC) wafers. We fabricate and test metal ferroelectric semiconductor capacitors, comprising of Al/Al0.68Sc0.32N/4H-SiC. Our devices exhibit asymmetric coercive electric field values of −5.55/+12.05 MV cm−1 at 100 kHz for FE switching, accounting for the voltage divided by the depletion region of the semiconducting SiC substrate under positive voltages. Furthermore, the FE AlScN exhibits a remanent polarization of 110 ± 2.8 μC cm−2, measured via a voltage-pulsed positive-up negative-down measurement. We further investigate the reliability of the reported devices, revealing an endurance of ∼3700 cycles and a retention time of 9.5 × 105 s without any significant loss of polarization. Our findings demonstrate the bipolar switching of high-quality thin Al0.68Sc0.32N films on doped SiC substrates enabling monolithic integration of nonvolatile memory with SiC-based logic devices appropriate for high temperature operation as well as for high-power switching, memory, and sensing applications.

14 November 2022 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
SCShangyi Chen
Shangyi Chen
MLMark Lust
Mark Lust
NGNima Ghalichechian
Nima Ghalichechian
This paper presents an antenna-coupled non-linear vanadium dioxide (VO2) microbolometer operating in the non-linear metal–insulator transition (MIT) region with an ultra-high responsivity of 6.55 × 104 V/W. Sputtered VO2 films used in this device exhibit 104 times change in resistivity between the dielectric and conductive states. The VO2 microbolometer is coupled to a wideband dipole antenna operating at 31–55 GHz and a coplanar waveguide for probed measurement. To enhance the sensitivity, the sensor is suspended in air by micro-electro-mechanical systems process. The large thermal coefficient of resistance of VO2 is utilized by DC biasing the device in the MIT region. Measurements for the fabricated sensor were performed, and a high responsivity was demonstrated, owing to non-linear conductivity change in the transition region. The measured sensitivity is >102 times higher than the state-of-the-art sensors. In addition, the concept of utilizing the proposed VO2 sensor in a mmWave imager was demonstrated by the radiation pattern measurement of a 4 × 4 (16 elements) antenna-coupled VO2 sensor array. The results presented in this work reveal the initial step to employ VO2's MIT for a hyper-sensitive sensor in future mmWave sensing and imaging applications.

26 January 2021 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
JLJiantong Li
Jiantong Li
CMCarmen Matos
Carmen Matos
SCShangyi Chen
Shangyi Chen
NGNima Ghalichechian
Nima Ghalichechian
A major shortcoming of current silicon-based millimeter-wave (mmWave) on-chip antennas is the low radiation efficiency (<; 50%). In this letter, we present a novel on-chip antenna array with the radiation efficiency >80% at 60 GHz. The proposed array addresses the issues of on-chip air-suspension using micro electro mechanical systems (MEMS) processes, thus elevating the hovering radiating elements on a substrate at the height of 35 μm (0.007 λ 0 ). The micofabricated SU-8 posts serve as the vertical support, ensuring mechanical stability and monolithic integration. The simulated -10 dB fractional bandwidth of this array is 5.5% or 3.4 GHz at 60 GHz. Further, the designed array is capable of scanning of ±55° in the E plane and ±58° in the H-plane. The noncontact backscattering method is proposed and employed to derive the radiation efficiency from measured radar cross-section (RCS) data. RCS measurements are performed using a precision six-axis robotic arm with the spatial repeatability of 20 μm (λ 0 /250). The measured radiation efficiency is 82% at 60 GHz. The measured peak gain of 9 × 9 array is 23.3 dBi versus simulated 23.6 dBi. Fundamental enhancement in suspended array efficiency is achieved by eliminating unwanted radiation in the silicon substrate. Compared to other on-chip integration approaches, the proposed array can be monolithically integrated on a silicon substrate while maintaining high radiation efficiency.