A dark pulse mode-locked laser is experimentally demonstrated using the indium tin oxide (ITO) coated D-shape fiber as a saturable absorber (SA). Using the polishing wheel technique, a D-shape single mode fiber was fabricated. A 60-nm-thick layer of ITO was deposited over the D-shape fiber using the electron beam deposition method. The SA has a saturation intensity of 40.32 MW/cm2 and a modulation depth of 3.5%. A stable dark pulse mode-locked laser was observed at a central wavelength of 1559.4 nm with repetition rate 0.98 MHz, pulse width 370 ns and signal-to-noise ratio 61 dB.
A passively Q‐switched erbium‐doped fibre laser was demonstrated by using tris‐(8‐hydroxyquinoline)aluminium (Alq 3 ) organic material as a passive saturable absorber (SA). The SA was fabricated by a drop casting technique at room temperature and incorporated into a laser cavity by inserting it between two optical fibre ferrules. The Q‐switched fibre laser operates at a centre wavelength of 1559 nm with a full‐width half maximum of 1 nm. The generated pulse train is stable and has a pulse width decreased from 6.65 to 1.2 µs and the pulse repetition rate increased from 31.65 to 144.5 kHz as the pump power increased from 20 to 122 mW. The maximum pulse energy obtained is 63.89 nJ. This work indicates that the Alq 3 as SA has a great potential to be utilised for pulsed laser generation. To the best of the authors' knowledge, this is the first time an organic material is utilised as a SA device for generating a stable Q‐switched laser pulse.
We have experimentally demonstrated a Q-switched fiber laser operating in the 1 µm region by using tris-(8-hydroxyquinoline) aluminum (Alq3) as a saturable absorber (SA). The Alq3 was fabricated through a drop-casting technique, where the material was embedded into a polyvinyl alcohol (PVA) film so that it can effectively incorporated into a laser cavity. The fiber laser has produced a high pulse energy of 0.8 µJ and peak power of 90 mW. When the laser cavity was reduced from 25 m to 5 m, the peak power increased and the pulse energy dropped to 237.62 mW and 451.5 nJ, respectively. Additionally, the minimum pulse width was reduced from 9 µs to 1.9 µs.