Molecular-beam epitaxy (MBE) is the gold standard for the epitaxial growth of complex oxides with the best material properties as determined by respective figures of merit. Unfortunately, once more than one cation is involved in the material desired, MBE growth often becomes plagued by difficulties in stoichiometry control. Instead of relying on a quartz crystal microbalance to measure the fluxes of the individual molecular beams, which lacks accuracy, or reflection high-energy electron diffraction oscillations of the targeted multication oxide in layer-by-layer growth, which lacks general applicability, here, we describe a canonical approach based on the growth of films of the constituent binary oxides or metals individually for cation flux calibration. This method can calibrate the flux of each molecular beam with an absolute accuracy of ±1%. After describing the growth parameters of binary oxides or metals enabling the individual fluxes of 39 elements of the periodic table to be determined, we demonstrate the efficacy of this approach by applying it to the growth of the quaternary ferromagnetic metal to achieve films with transport properties rivalling the best reported using thin-film growth techniques providing stoichiometric transfer.
Utilizing the powerful combination of molecular-beam epitaxy (MBE) and angle-resolved photoemission spectroscopy (ARPES), we produce and study the effect of different terminating layers on the electronic structure of the metallic delafossite PdCoO2. Attempts to introduce unpaired electrons and synthesize new antiferromagnetic metals akin to the isostructural compound PdCrO2 have been made by replacing cobalt with iron in PdCoO2 films grown by MBE. Using ARPES, we observe similar bulk bands in these PdCoO2 films with Pd-, CoO2-, and FeO2-termination. Nevertheless, Pd- and CoO2-terminated films show a reduced intensity of surface states. Additionally, we are able to epitaxially stabilize PdFexCo1−xO2 films that show an anomaly in the derivative of the electrical resistance with respect to temperature at 20 K, but do not display pronounced magnetic order.
We outline a method to synthesize (ATiO3)nAO Ruddlesden–Popper phases with high-n, where the A-site is a mixture of barium and strontium, by molecular-beam epitaxy. The precision and consistency of the method described is demonstrated by the growth of an unprecedented (SrTiO3)50SrO epitaxial film. We proceed to investigate barium incorporation into the Ruddlesden–Popper structure, which is limited to a few percent in bulk, and we find that the amount of barium that can be incorporated depends on both the substrate temperature and the strain state of the film. At the optimal growth temperature, we demonstrate that as much as 33% barium can homogeneously populate the A-site when films are grown on SrTiO3 (001) substrates, whereas up to 60% barium can be accommodated in films grown on TbScO3 (110) substrates, which we attribute to the difference in strain. This detailed synthetic study of high n, metastable Ruddlesden–Popper phases is pertinent to a variety of fields from quantum materials to tunable dielectrics.
Single-crystal delafossite is known to have an extremely low intrinsic impurity concentration of ∼0.001%, demonstrating extraordinarily high conductivity with a mean free path of ∼20 μm at low temperatures. However, when grown as thin films, the resistivity at room temperature increases by a factor of 3–80 times, depending on the film thickness. Using scanning transmission electron microscopy, we identify different classes of defects for the single crystal vs epitaxial thin film. The dominant defect for single-crystal is found to be ribbonlike defects. For the thin films, we identify different types of defects arising in epitaxial thin films mainly due to substrate termination that disrupt the lateral connectivity of the conducting planes. Our results are consistent with the high conductivity of single crystals and increased electrical resistivity of the thin films compared to that of single crystals, suggesting that selecting a proper substrate, improving surface quality, and reducing the step density are the keys to enhance the film quality for utilizing as a platform for future applications.
We demonstrate a-axis YBa2Cu3O7-x/PrBa2Cu3O7-x/YBa2Cu3O7-x trilayers grown on (100) LaAlO3 substrates with improved interface smoothness. The trilayers are synthesized by ozone-assisted molecular-beam epitaxy. The thickness of the PrBa2Cu3O7-x layer is held constant at 8 nm and the thickness of the YBa2Cu3O7-x layers is varied from 24 nm to 100 nm. X-ray diffraction measurements show all trilayers to have >95% a-axis content. The rms roughness of the thinnest trilayer is < 0.7 nm and this roughness increases with the thickness of the YBa2Cu3O7-x layers. The thickness of the YBa2Cu3O7-x layers also affects the transport properties: while all samples exhibit an onset of the superconducting transition at and above 85 K, the thinner samples show wider transition widths, {\Delta}Tc. High-resolution scanning transmission electron microscopy reveals coherent and chemically sharp interfaces, and that growth begins with a cubic (Y,Ba)CuO3-x perovskite phase that transforms into a-axis oriented YBa2Cu3O7-x as the substrate temperature is ramped up.