20 October 2023 in Science Advances
The concept of remote epitaxy involves a two-dimensional van der Waals layer covering the substrate surface, which still enable adatoms to follow the atomic motif of the underlying substrate. The mode of growth must be carefully defined as defects, e.g., pinholes, in two-dimensional materials can allow direct epitaxy from the substrate, which, in combination with lateral epitaxial overgrowth, could also form an epilayer. Here, we show several unique cases that can only be observed for remote epitaxy, distinguishable from other two-dimensional material-based epitaxy mechanisms. We first grow BaTiO 3 on patterned graphene to establish a condition for minimizing epitaxial lateral overgrowth. By observing entire nanometer-scale nuclei grown aligned to the substrate on pinhole-free graphene confirmed by high-resolution scanning transmission electron microscopy, we visually confirm that remote epitaxy is operative at the atomic scale. Macroscopically, we also show variations in the density of GaN microcrystal arrays that depend on the ionicity of substrates and the number of graphene layers.
2 May 2022 in Nano Letters
MCMa. de la Paz Cruz-Jáuregui
Ma. de la Paz Cruz-Jáuregui
DVDuilio Valdespino-Padilla
Duilio Valdespino-Padilla
+4
2 February 2023 in Journal of Vacuum Science & Technology A
Strain-engineering is a powerful means to tune the polar, structural, and electronic instabilities of incipient ferroelectrics. KTaO3 is near a polar instability and shows anisotropic superconductivity in electron-doped samples. Here, we demonstrate growth of high-quality KTaO3 thin films by molecular-beam epitaxy. Tantalum was provided by either a suboxide source emanating a TaO2 flux from Ta2O5 contained in a conventional effusion cell or an electron-beam-heated tantalum source. Excess potassium and a combination of ozone and oxygen (10% O3 + 90% O2) were simultaneously supplied with the TaO2 (or tantalum) molecular beams to grow the KTaO3 films. Laue fringes suggest that the films are smooth with an abrupt film/substrate interface. Cross-sectional scanning transmission electron microscopy does not show any extended defects and confirms that the films have an atomically abrupt interface with the substrate. Atomic force microscopy reveals atomic steps at the surface of the grown films. Reciprocal space mapping demonstrates that the films, when sufficiently thin, are coherently strained to the SrTiO3 (001) and GdScO3 (110) substrates.
1 February 2021 in APL Materials
Homologous series are layered phases that can have a range of stoichiometries depending on an index n. Examples of perovskite-related homologous series include (ABO3)nAO Ruddlesden–Popper phases and (Bi2O2) (An−1BnO3n+1) Aurivillius phases. It is challenging to precisely control n because other members of the homologous series have similar stoichiometry and a phase with the desired n is degenerate in energy with syntactic intergrowths among similar n values; this challenge is amplified as n increases. To improve the ability to synthesize a targeted phase with precise control of the atomic layering, we apply the x-ray diffraction (XRD) approach developed for superlattices of III–V semiconductors to measure minute deviations from the ideal structure so that they can be quantitatively eradicated in subsequent films. We demonstrate the precision of this approach by improving the growth of known Ruddlesden–Popper phases and ultimately, by synthesizing an unprecedented n = 20 Ruddlesden–Popper phase, (ATiO3)20AO where the A-site occupancy is Ba0.6Sr0.4. We demonstrate the generality of this method by applying it to Aurivillius phases and the Bi2Sr2Can–1CunO2n+4 series of high-temperature superconducting phases.
29 March 2022 in Physical Review Materials
Molecular-beam epitaxy (MBE) is the gold standard for the epitaxial growth of complex oxides with the best material properties as determined by respective figures of merit. Unfortunately, once more than one cation is involved in the material desired, MBE growth often becomes plagued by difficulties in stoichiometry control. Instead of relying on a quartz crystal microbalance to measure the fluxes of the individual molecular beams, which lacks accuracy, or reflection high-energy electron diffraction oscillations of the targeted multication oxide in layer-by-layer growth, which lacks general applicability, here, we describe a canonical approach based on the growth of films of the constituent binary oxides or metals individually for cation flux calibration. This method can calibrate the flux of each molecular beam with an absolute accuracy of ±1%. After describing the growth parameters of binary oxides or metals enabling the individual fluxes of 39 elements of the periodic table to be determined, we demonstrate the efficacy of this approach by applying it to the growth of the quaternary ferromagnetic metal to achieve films with transport properties rivalling the best reported using thin-film growth techniques providing stoichiometric transfer.
12 April 2021 in npj Materials Degradation
To understand the atomistic phenomenon behind initial oxidation processes, we have studied the nanoscale evolution of oxide growth prior to the formation of a complete layer on a Ni–15 wt%Cr(100) alloy surface using scanning tunneling microscopy/spectroscopy (STM/STS). At the onset of oxidation, a NiO superlattice forms oxide wedges across the step edges, eventually growing across the terraces. The completion of the NiO layer is followed by nucleation of the next layer, which always commences at the groove site of the superlattice. The Cr-oxide formation initiates as disk-shaped oxide particles early in the oxidation process, which Monte Carlo simulations reveal are likely caused by Cr clustering across the alloy surface. Upon further oxidation, a Cr(100)-p(2 × 2)O reconstructed surface is observed, indicating phase separation of Cr predicates the formation of the passive Cr-oxide film. The STS results vary across the oxide–alloy interface and between each oxide, providing greater insight into the origins of electronic heterogeneity and their effect on oxide growth. Using these data, we propose an oxidation model that highlights the growth of partial oxide layers on Ni–Cr(100) alloys within the pre-Cabrera–Mott regime.