24 May 2025 in Ceramics International
10 October 2018 in IEEE Transactions on Nuclear Science
Most of the high-performance research reactors are made of plates undergoing limited structural modifications during irradiation. Measuring the fuel thickness or the interplate distance is then a promising way to obtain information on the fuel element irradiation history. The experimental constraints are, however, quite heavy due to the aimed resolution and the element geometry. In order to perform such measurements, a high-resolution ultrasonic device was designed. It was thinned down to a 1 mm thickness in order to be inserted into the reactor water channel. The system was then excited with a 120-MHz central frequency burst and distance measurements were carried out through ultrasonic waves' time-of-flight estimations. A series of experiments was performed on a full-size irradiated fuel element of the “Institut Laue-Langevin” reactor proving the feasibility of real-time in situ measurements.
17 July 2024 in NDT & E International
1 September 2026 in e-Journal of Nondestructive Testing
UFUniversité Polytechnique Des Hauts de France
Université Polytechnique Des Hauts de France
Film adhesion is a critical phenomenon that has been thoroughly investigated to improve structural reliability, notably in microelectronics. In this work, Laser Ultrasonics is used to evaluate the bond quality achieved by an original electroadhesion process. More precisely, an electrostatic field is applied to a polyvinyl chloride film deposited on an aluminum substrate, thereby eliminating the need for an adhesive layer. The effects of electroadhesion on Surface Acoustic Waves (SAWs) are explored, with results solely attributable to interfacial adhesion changes. These waves are generated in thermoelastic regime by a frequency-doubled Nd:YAG pulsed laser and detected by a Mach-Zehnder heterodyne interferometer. The experimental Rayleigh mode dispersion curves are compared to the theoretical ones, facilitating adhesion evaluation through inverse problems. Furthermore, Finite Element Modeling predicts acoustic wave propagation in the structure, enabling experimental and numerical comparisons. This research paves the way for a multiphysical analysis of electrostatic field-induced coating adhesion.