11 February 2016 in IEEE Robotics and Automation Letters
This letter represents a sliding-based controller for steering beveled-tip needles to stationary locations in soft tissue in a 2-D environment by performing appropriate switches of bevel orientation by 180° axial rotations while the needle is being inserted. Assuming the rotation velocity to be large enough with respect to insertion velocity, the out of plane motions of the needle can be neglected. The proposed controller has a nonmodel-based structure, which is fed by the needle tip deflection error and its derivative obtained from ultrasound images and outputs the switching pattern as the control law. To analyze the stability and convergence of the error, the kinematic unicycle model for beveled-tip needle motion in soft tissue is employed and the constraints on switching parameters are derived. The performance of the controller in the sense of targeting error and number of switches is verified using an experimental setup to insert the needle into gelatin phantom tissue and ex-vivo biological tissue.
23 October 2019 in IEEE Transactions on Control Systems Technology
24 July 2019 in IEEE/ASME Transactions on Mechatronics
In this paper, we design a set of 2D needle steering controllers used to minimize the 3D deflection of a flexible, bevel-tipped needle. The controllers are based on a nonlinear design tool known as integrator-backstepping. The needle's deflection is split into its two 2D planar problems, each of which is then governed by its own, separate controller. One controller, called Vertical Deflection Control (VDC), steers the needle so that it deflects primarily along the vertical plane. The second controller, called Horizontal Deflection Control (HDC), steers the needle so that it deflects primarily along the horizontal plane. Our 3D steering algorithm combines the effect of these two controllers based on the current magnitude of the deflection along each plane. Using an 18 gauge brachytherapy needle, we tested our proposed method on a phantom tissue composed of liquid plastic, and a two-layer biological tissue formed of gelatin and ex-vivo beef. Without needle steering, the average needle deflection was 11.2 mm. Using the proposed 3D needle steering technique, the deflection decreased to an average of 0.5 mm.
1 September 2018 in Journal of Medical Robotics Research