1 January 2018 in Waste Management
Electrodialytic process offers a range of possibilities to waste management by electrodialytic separation (EDS) of heavy metals, depending on how the process is designed. Using three EDS cell setups (two two-compartment and one three-compartment) and their combinations, the extraction of Cr from municipal solid waste incineration fly ash by changing pH and redox conditions was investigated in the present work. The experiments were designed into single, two and three steps, based on the number of setups (by changing EDS cells) or effective setups (by shifting working electrode pairs) used. Prior to EDS the ash studied went through pretreatments such as water-washing and dry-sieving with a 50 µm sieve. The results showed that Cr was strongly bound in the ash, and the major fraction remained bound after the different treatments. Two/three-step treatment, which obtained the maximum Cr extraction rate of 27.5%, is an improvement on the single-step that extracted maximum 3.1%. The highest extraction was obtained due to the combined extraction of Cr(III) under low pH (accompanied with high redox) conditions and Cr(VI) under high pH (low redox) conditions subsequently. The Cr leaching from the treated ashes with acidic pH was lower than from those with alkaline pH; after the three-step treatment, Cr leaching was much lower from the coarse fraction (> 50 µm), as compared to the fine (≤ 50 µm) or the unsieved ash. As for the coarse fraction, two/three-step treatment reduced the leaching of Cr compared to the single-step in the same pH range (either acidic or alkaline).
27 February 2023 in Energy
24 May 2016 in Oncotarget
Indolin-2-one compounds targeting thioredoxin reductase as potential anticancer drug leads
2 September 2020 in IEEE Access
In this paper, ultrasound imaging of benign and malignant thyroid nodules to predict the depth of the learning algorithm, built on circulation volume product thyroid ultrasound image neural network forecasting model. Introduced the convolutional neural network and the recurrent neural network, and combined the advantages of the convolutional neural network and the recurrent neural network, improved the prediction model, constructed the recurrent convolutional neural network prediction model and optimized the prediction model. Soc max algorithm and L2 regularization are introduced to prevent the occurrence of over-fitting. This study introduces the technology and tools required for the development of forecasting systems, the feasibility analysis of the system, demand analysis and system design and other system development preliminary work. Describes the function of the thyroid nodule prediction system and related work such as system testing. Based on the above research, thyroid ultrasound images obtained by the cooperative hospital are used as a data set, and the cyclic convolutional neural network prediction model is used to predict training and testing to the development of a thyroid nodule prediction system. The experimental results show that the prediction system has high prediction accuracy.
1 November 1990 in Journal of Hepatology