Harvesting energy from previously unemployed ambient sources can play important role in saving energy and reducing the dependency to primary power sources (ACpower or battery) of an electronic system. High-performance integrated circuits such as microprocessor, typically suffers from high surface temperature (in the order of 80-100degC) resulting from the high power density and limited cooling capacity of the package. In this paper, we consider the scope of harvesting thermoelectric energy from the wasted heat in a microprocessor leveraging on the temperature gradient between processor die surface and environment. First, we develop analytical model to accurately estimate the recycled energy considering the non-uniformity of temperature distribution in the die surface. Next, we analyze the effectiveness of the approach for thermoelectric generator (TEG) with different efficiencies (measured in terms of its figure of merit, ZT) under varying processor workload. Finally, we propose a possible arrangement for using the TEG on a processor and provide measurement results on the amount of harvested energy. The measurements on a Pentium III processor running at 1 GHz show that we can harvest ~7 mW of power from the processor for average workload using a commercial TEG.
Modern-day bio-implantable chips for neural prostheses cannot monitor a large number of electrodes at the same time since they suffer from excessively high data rates. Hence, it is imperative to design area and power-efficient digital circuits for appropriate conditioning of the recorded neural signal in order to remain within the bandwidth constraint. Previously, we have proposed an algorithm for neural data compression, which incorporates the concept of creating and maintaining a dynamic vocabulary of neural spike waveforms represented as wavelet transform coefficients. In this paper, we propose an appropriate architecture for low-power and area-efficient VLSI implementation of the scheme. Based on simulation results, the hardware consumes 3.55 μW and 0.36 mW power using 0.18μm CMOS technology for 1-channel and 100-channel neural recording applications, respectively.