15 October 2011 in Journal of Electronic Testing
20 November 2006 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
A novel integrated approach for delay-fault testing in external (automatic-test-equipment-based) and test-per-scan built-in self-test (BIST) using on-die delay sensing and test point insertion is proposed. A robust, low-overhead, and process-tolerant on-chip delay-sensing circuit is designed for this purpose. An algorithm is also developed to judiciously insert delay-sensor circuits at the internal nodes of logic blocks for improving delay-fault coverage with little or no impact on the critical-path delay. The proposed delay-fault testing approach is verified for transition- and segment-delay-fault models. Experimental results for external testing (BIST) show up to 31% (30%) improvement in fault coverage and up to 67.5% (85.5%) reduction in test length for transition faults. An increase in the number of robustly detectable critical-path segments of up to 54% and a reduction in test length for the segment-delay-fault model of up to 76% were also observed. The delay and area overhead due to insertion of the delay-sensing hardware have been limited to 2% and 4%, respectively
2 August 2013 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Field-programmable gate arrays (FPGAs) are being increasingly used as a preferred prototyping and accelerator platform for diverse application domains, such as digital signal processing (DSP), security, and real-time multimedia processing. However, mapping of these applications to FPGA typically suffers from poor energy efficiency because of high energy overhead of programmable interconnects (PI) in FPGA devices. This paper presents an energy-efficient heterogenous application mapping framework in FPGA, where the conventional application mappings to logic and DSP blocks (for DSP-enhanced FPGA devices) are combined with judicious mapping of specific computations to embedded memory blocks. A complete mapping methodology including functional decomposition, fusion, and optimal packing of operations is proposed and efficiently used to reduce the large energy overhead of PIs. Effectiveness of the proposed methodology is verified for a set of common applications using a commercial FPGA system. Experimental results show that the proposed heterogenous mapping approach achieves significant energy improvement for different input bit-widths (e.g., more than 35% of energy savings with 8 bit or smaller bit inputs compared to the corresponding mapping in configurable logic blocks). For further reduction of energy, we propose an energy/accuracy tradeoff approach, where the input operand bit-width is dynamically truncated to reduce memory area and energy at the expense of modest degradation in output-accuracy. We show that using a preferential truncation method, up to 88.6% energy savings can be achieved in a 32-tap finite impulse response filter with modest impact on the filter performance.