1 October 2026 in Physics of Fluids
We investigate the interfacial dynamics of two immiscible fluids flowing within a two-dimensional microchannel with structured wall roughness through numerical simulations. The simulations are performed using a finite-volume approach combined with the volume-of-fluid method to capture the fluid interface. Wall roughness is introduced on one wall of a straight channel in the form of an obstacle array. Three different obstacle shapes are considered: rectangular, triangular, and semi-elliptical. The effects of geometric parameters, including the spacing-to-width ratio (s/d) and height-to-width ratio (h/d), intrinsic contact angle (θC), viscosity ratio, and capillary number (Ca), are examined. The results show that roughness shape strongly influences interfacial behavior. The rectangular shape produces the largest interfacial deformation and promotes greater water entrapment, whereas the triangular shape results in a more stable interface. Reducing s/d increases water trapping and slightly accelerates interface movement, whereas increasing h/d produces a more pronounced influence on the flow. Changes in θC alter the interface curvature and are associated with higher apparent contact angles and more frequent water entrapment within the cavities. The onset of partial water trapping occurs at a local capillary number of approximately 1.1×10−4 for triangular and rectangular elements, whereas semi-elliptical profiles require a nearly fourfold higher threshold. For capillary numbers below 10−3, the static contact angle formulation remains physically valid because deviations of the dynamic contact line are minimal.