Reconfigurable intelligent surfaces (RISs) have the potential of realizing the emerging concept of smart radio environments by leveraging the unique properties of metamaterials and large arrays of inexpensive antennas. In this article, we discuss the potential applications of RISs in wireless networks that operate at high-frequency bands, e.g., millimeter wave (30–100 GHz) and sub-millimeter wave (greater than 100 GHz) frequencies. When used in wireless networks, RISs may operate in a manner similar to relays. The present paper, therefore, elaborates on the key differences and similarities between RISs that are configured to operate as anomalous reflectors and relays. In particular, we illustrate numerical results that highlight the spectral efficiency gains of RISs when their size is sufficiently large as compared with the wavelength of the radio waves. In addition, we discuss key open issues that need to be addressed for unlocking the potential benefits of RISs for application to wireless communications and networks.
A reconfigurable intelligent surface (RIS) is a planar structure that is engineered to dynamically control the electromagnetic waves. In wireless communications, RISs have recently emerged as a promising technology for realizing programmable and reconfigurable wireless propagation environments through nearly passive signal transformations. With the aid of RISs, a wireless environment becomes part of the network design parameters that are subject to optimization. In this tutorial article, we focus our attention on communication models for RISs. First, we review the communication models that are most often employed in wireless communications and networks for analyzing and optimizing RISs and elaborate on their advantages and limitations. Then, we concentrate on models for RISs that are based on inhomogeneous sheets of surface impedance and offer a step-by-step tutorial on formulating electromagnetically consistent analytical models for optimizing the surface impedance. The differences between local and global designs are discussed and analytically formulated in terms of surface power efficiency and reradiated power flux through the Poynting vector. Finally, with the aid of numerical results, we discuss how approximate global designs can be realized by using locally passive RISs with zero electrical resistance (i.e., inhomogeneous reactance boundaries with no local power amplification) even for large angles of reflection and at high power efficiency.
17 May 2021 in IEEE Transactions on Communications
In this paper, we introduce a physics-consistent analytical characterization of the free-space path-loss of a wireless link in the presence of a reconfigurable intelligent surface. The proposed approach is based on the vector generalization of Green's theorem. The obtained path-loss model can be applied to two-dimensional homogenized metasurfaces, which are made of sub-wavelength scattering elements and that operate either in reflection or transmission mode. The path-loss is formulated in terms of a computable integral that depends on the transmission distances, the polarization of the radio waves, the size of the surface, and the desired surface transformations. Closed-form expressions are obtained in two asymptotic regimes that are representative of far-field and near-field deployments. Based on the proposed approach, the impact of several design parameters and operating regimes is unveiled.
12 July 2023 in IEEE Open Journal of the Communications Society
In this paper, with the aid of the mathematical tool of stochastic geometry, we introduce analytical and computational frameworks for the distribution of three different definitions of delay, i.e., the time that it takes for a user to successfully receive a data packet, in large-scale cellular networks. We also provide an asymptotic analysis of one of the delay distributions, which can be regarded as the packet loss probability of a given network. To facilitate the computation of the obtained analytical formulations, we propose efficient numerical approximations based on the numerical inversion method, the Riemann sum, and the beta distribution. Finally, we demonstrate the accuracy of the obtained analytical formulations and the corresponding approximations against Monte Carlo simulations, and unveil insights on the delay performance with respect to several design parameters, such as the decoding threshold, the transmit power, and the deployment density of the base stations. The proposed methods can facilitate the analysis and optimization of cellular networks, subject to reliability constraints on the network packet delay, that are not restricted to the local (average) delay, e.g., in the context of delay sensitive applications.
31 December 2024 in Jurnal Elektronika dan Telekomunikasi
Reconfigurable intelligent surface (RIS) is a key technology to enable the concept of smart radio environment (SRE) which is envisioned to meet the ever-increasing demands of connectivity in the upcoming decade. However, most existing works consider a RIS that is seen as a whole surface. In this paper, we study the performance of a RIS that consists of multiple tiles, each of which is capable of performing certain wave manipulation, by deriving the physics-compliant analytical formulation of the received signal at the receiver. We also introduce the numerical approximation of the signal for different operating regimes and different functionalities. Based on the obtained result, we study the impact of the number of fixed-sized tiles and partitioning of a fixed-sized RIS on the maximum achievable intensity. The validity of our findings is confirmed through extensive simulation results.
Communications sans fil assistées par des surfaces intelligentes reconfigurables : un modèle électromagnétique: L'émergence de l'environnement radio intelligent (SRE) en tant que nouveau paradigme qui remet en question le status quo dans la communication sans fil a motivé l'utilisation des surface intelligentes reconfigurables (RIS) basées sur des métasurfaces pour améliorer la limite de performance des systèmes de communication sans fil. L'objectif principal de cette thèse est la modélisation d'un système de communication assisté par un RIS à l'aide d'approches basées sur l'électromagnétisme.Le Chapitre 1 présente le concept d'environnement radio intelligent. Nous donnons également la définition du RIS et comment le RIS peut être utilisé dans le contexte du SRE. Nous donnons aussi quelques perspectives historiques et discutons le développement des activités de recherche dans ce contexte.Le Chapitre 2 présente les concepts théoriques nécessaires pour comprendre les résultats des chapitres suivants. Ce chapitre est divisé en deux parties. La première partie traite de la modélisation des métasurfaces où nous passons d'une description microscopique basée sur la physique d'une métasurface et introduisons une représentation macroscopique de celle-ci, qui s'avère appropriée pour une application aux communications sans fil. La deuxième partie présente plusieurs approches analytiques qui nous permettent de calculer le champ électromagnétique dans un certain volume..Le Chapitre 3 fournit une comparaison des performances entre les RISs fonctionnant comme des réflecteurs anormaux et un schéma de relais basé sur le décodage et la transmission. La comparaison est qualitative et couvre une multitude de métriques. En outre, une comparaison quantitative en termes de débits de données réalisables est également présentée. En particulier, les résultats numériques montrent que des RISs suffisamment grands peuvent être plus performants que les systèmes assistés par relais en termes de débit de données, tout en réduisant la complexité.Le Chapitre 4 propose une caractérisation analytique du champ électromagnétique en présence d'un RIS qui est modélisé comme une métasurface homogénéisée et qui fonctionne soit en réflexion ou transmission. Des expressions de forme fermée sont également obtenues dans deux régimes asymptotiques qui sont représentatifs de deux déploiements en champ lointain et en champ proche. Sur la base de l'approche proposée, l'impact de plusieurs paramètres est étudié.Enfin, le Chapitre 5 résume la thèse et discute des perspectives futures qui méritent d'être étudiées pour mieux comprendre les avantages et les inconvénients des RISs pour application aux communications sans fil.