Improving heat transfer is crucial for enhancing energy efficiency and reducing operational costs in thermal systems. This study is motivated by the need to develop compact and cost-effective heat exchangers through the use of passive enhancement techniques. In particular, twisted tape inserts have gained significant attention due to their ability to intensify fluid mixing and disrupt thermal boundary layers. The aim of this study is to numerically investigate the thermal and hydraulic performance of a circular pipe equipped with three types of inserts: plain twisted tape (TT), circular-perforated twisted tape (CPTT), and hexa-perforated twisted tape (HPTT). Using ANSYS Fluent and the finite volume method, simulations were performed under constant heat flux for Reynolds numbers ranging from 5000 to 20000. The results show that all twisted tape configurations considerably improve heat transfer compared to a plain tube, with Nusselt number enhancements of up to 62.37% for TT, 65.85% for CPTT, and 76.27% for HPTT. These enhancements are accompanied by increased friction factors of 150.68%, 154.31%, and 176.05%, respectively. The highest performance evaluation criterion (PEC) of 1.25 was achieved by the CPTT, indicating its optimal thermal-hydraulic balance. The findings of this study are relevant to the design and optimization of heat exchangers in various industrial applications, including solar thermal systems, chemical processing, and HVAC systems.
1 September 2025 in International Journal of Thermodynamics
This study focuses on enhancing heat transfer in a concentric double-tube heat exchanger by incorporating internal turbulators of two distinct geometries: conical and fusiform. The study numerically investigates the impact of these turbulators, placed within the inner tube, on turbulent flow and thermal performance over a Reynolds number range of 4000 to 12,000. A numerical study was carried out using ANSYS Fluent 16.0 software, where the governing equations were solved by the finite volume method. The Realizable k–ε turbulence model was used to capture the effects of turbulence on the flow field. Key performance indicators such as the Nusselt number and pressure drop were analyzed for both configurations. The results reveal that fusiform turbulators provide superior thermal enhancement, increasing the average Nusselt number by up to 34% compared to a smooth tube. However, this enhancement is accompanied by a significant increase in pressure drop across all tested cases, underlining the trade-off between heat transfer improvement and flow resistance. These findings demonstrate the effectiveness of fusiform geometries in improving the thermohydraulic efficiency of tubular heat exchangers.