1 September 2025 in International Journal of Thermodynamics
Improving heat transfer is crucial for enhancing energy efficiency and reducing operational costs in thermal systems. This study is motivated by the need to develop compact and cost-effective heat exchangers through the use of passive enhancement techniques. In particular, twisted tape inserts have gained significant attention due to their ability to intensify fluid mixing and disrupt thermal boundary layers. The aim of this study is to numerically investigate the thermal and hydraulic performance of a circular pipe equipped with three types of inserts: plain twisted tape (TT), circular-perforated twisted tape (CPTT), and hexa-perforated twisted tape (HPTT). Using ANSYS Fluent and the finite volume method, simulations were performed under constant heat flux for Reynolds numbers ranging from 5000 to 20000. The results show that all twisted tape configurations considerably improve heat transfer compared to a plain tube, with Nusselt number enhancements of up to 62.37% for TT, 65.85% for CPTT, and 76.27% for HPTT. These enhancements are accompanied by increased friction factors of 150.68%, 154.31%, and 176.05%, respectively. The highest performance evaluation criterion (PEC) of 1.25 was achieved by the CPTT, indicating its optimal thermal-hydraulic balance. The findings of this study are relevant to the design and optimization of heat exchangers in various industrial applications, including solar thermal systems, chemical processing, and HVAC systems.
22 August 2026 in Solar Energy
1 June 2025 in International Journal of Thermodynamics
The intermittent drying of dates remains a neglected area in academic research, primarily due to factors such as varying cultivation patterns across regions and limited attention to the valorization of overdried dates. This study investigates the impact of drying parameters: air temperature, air velocity, and intermittency ratio, on the drying time and energy consumption of rehydrated dates using hot air drying. Employing Response Surface Methodology with a Central Composite Design and a desirability function, experiments were conducted within specific ranges of air temperatures (40–70 °C), air velocities (0.5–5 m/s), and intermittency ratios (0.2–1). Results show that while air velocity minimally affects drying time, it negatively influences energy efficiency. Conversely, air temperature is significant for both responses. Reducing the intermittency ratio from 1 to 0.3 resulted in a decrease in total energy consumption by up to 60%, particularly at lower temperatures, with negligible impact on total drying time. The study identifies optimal conditions for minimizing both drying time and energy consumption as an inlet temperature of 66 °C, air velocity of 2.5 m/s, and an intermittency ratio of 0.7. The experimental data were fitted to 7 mathematical drying models, the results indicated that Midilli-Kucuk model gave better performance to define the drying kinetics of intermittent drying of rehydrated dates.
1 June 2025 in Applied Solar Energy
Solar drying is a sustainable option for preserving horticultural products, but cover material strongly affects thermal behavior and drying efficiency. Thi
8 January 2025 in Acta Universitatis Sapientiae, Electrical and Mechanical Engineering
AUAbou Bekr Belkaid University
Abou Bekr Belkaid University
+2
This study aims to enhance the efficiency of flat plate solar collectors by integrating offset strip fins and utilizing Ansys Fluent for numerical analysis, validating results from a SolidWorks-designed solar air dryer. It outlines system components and objectives based on a standard model, supporting both theoretical and experimental analyses for applications in air conditioning and agro-food drying. Key boundary conditions, such as inlet temperature, air velocity, and absorber emissivity, were defined while maintaining experimental dimensions. Mesh tests ensured simulation accuracy for essential thermodynamic parameters, including outlet temperature and pressure, using the realizable k-epsilon turbulence model. The advanced model features obstacles that increase the heat transfer area by 53.6 % and create secondary turbulent flow. Staggered offset strip fins improved temperature by 12.6 % at an air velocity of 0.92 m/s (Re = 6000), significantly enhancing the overall effectiveness of the solar collector.