14 May 2018 in Applied Physics Letters
Electrowetting (EW) of water drops in ambient oil has found a wide range of applications including lab-on-a-chip devices, display screens, and variable focus lenses. The efficacy of all these applications is dependent on the contact angle hysteresis (CAH), which is generally reduced in the presence of ambient oil due to thin lubrication layers. While it is well-known that AC voltage reduces the effective contact angle hysteresis (CAH) for EW in ambient air, we demonstrate here that CAH for EW in ambient oil increases with increasing AC and DC voltage. Taking into account the disjoining pressure of the fluoropolymer-oil-water system, short range chemical interactions, viscous oil entrainment, and electrostatic stresses, we find that this observation can be explained by progressive thinning of the oil layer underneath the drop with increasing voltage. This exposes the droplet to the roughness of the underlying solid and thereby increases hysteresis.
10 December 2018 in Applied Physics Letters
We show here that ac electrowetting (ac-EW) with structured electrodes can be used to control the gravity-driven shedding of drops condensing onto flat hydrophobic surfaces. Under ac-EW with straight interdigitated electrodes, the condensate drops shed with relatively small radii due to the ac-EW-induced reduction of contact angle hysteresis. The smaller shedding radius, coupled with the enhanced growth due to coalescence under EW, results in an increased shedding rate. We also show that the condensate droplet pattern under EW can be controlled, and the coalescence can be further enhanced, using interdigitated electrodes with zigzag edges. Such enhanced coalescence in conjunction with the electrically induced trapping effect due to the electrode geometry results in a larger shedding radius, but a lower shedding rate. However, the shedding characteristics can be further optimized by applying the electrical voltage intermittently. We finally provide an estimate of the condensate volume removed per unit time in order to highlight how it is enhanced using ac-EW-controlled dropwise condensation.
1 January 2017 in Biomicrofluidics
We present a process for fabrication of free-standing SU-8 probes, with a dry, mechanical release of the final micro-devices. The process utilizes the thermal release tape, a commonly used cleanroom material, for facile heat-release from the sacrificial layer. For characterization of the SU-8 microfluidic probes, two liquid interfaces were designed: a disposable interface with integrated wells and an interface with external liquid reservoirs. The versatility of the fabrication and the release procedures was illustrated by further developing the process to functionalize the SU-8 probes for impedance sensing, by integrating metal thin-film electrodes. An additional interface scheme which contains electronic components for impedance measurements was developed. We investigated the possibilities of introducing perforations in the SU-8 device by photolithography, for solution sampling predominantly by diffusion. The SU-8 processes described here allow for a convenient batch production of versatile free-standing microfluidic devices with well-defined tip-geometry.
21 August 2019 in Soft Matter
The stability of a thin film of an ambient lubricating fluid controls the mobility of electrowetting- and capillarity-driven droplets in asymmetric, wedge-shaped channels.