20 October 2023 in Langmuir
The formation of highly stable water-in-oil emulsions results in complications in both upstream and downstream processing. Emulsion stability in these systems has been connected to the adsorption of surface-active asphaltenes that are assumed to form a rigidified film at the oil/water (o/w) interface. Full characterization of this behavior is needed to allow for engineered solutions for enhanced oil recovery. Interfacial properties, such as surface pressure and interfacial elasticity, are implicated in the stabilizing mechanism for these observed films. Asphaltenes are known to be interfacially active in both good solvents (aromatics) and poor solvents (high ratio of aliphatic to aromatic). However, due to inherent complexities present in asphaltene studies, the details of the mechanical properties of the interface remain poorly understood. Despite the widely accepted perception that asphaltenes form persistent rigid films at fluid-fluid interfaces, the connection between bulk solution properties and interfacial mechanics has not been resolved. Here, the effects of solvent quality on the interfacial properties of asphaltene dispersions are determined by using a well-defined asphaltene/solvent system. Interfacial rigidity is observed only under poor solvent conditions, while the good solvent system remains fluid-like. The interfacial rheology under good and poor solvent conditions is measured simultaneously with surface pressure measurements to track interfacial development. It is shown that surface pressure and dilatational modulus measurements are not indicators of whether an interface demonstrates rigid behavior under large compressions. Finally, conditions required for asphaltene-coated interfaces to exhibit the mechanical behavior associated with a rigidified interface are defined. This work provides a framework for quantifying the impact of the aggregation state of asphaltenes on the stability and mechanics at the o/w interface.
7 August 2025 in Langmuir
Fluid/fluid interfaces stabilized with strongly adsorbed solid nanoparticles are implemented in industries including cosmetics, pharmaceuticals, and food science. Solid particles at the interface result in complex interfacial mechanics, which are highly dependent on interfacial particle behavior and bulk properties of both fluid phases. Many interfacial studies have been conducted characterizing the effects of the aqueous fluid properties such as particle chemistry, pH, temperature, salinity, and the impact of surfactant and other additives on interfacial mechanics and adsorption behavior. However, the role of the hydrophobic phase on interfacial stability, as well as the adsorption and organization of interfacial material, is less understood. In this work, mechanical properties of particle-laden interfaces are characterized at oil/water and air/water interfaces to determine the impact of the hydrophobic fluid on particle jamming at the fluid/fluid interface. A model aqueous phase containing CTAB-SiO2 (cationic surfactant-anionic nanoparticle) complexes is used to deliver particles to air/water, dodecane/water, and silicone oil/water interfaces using a fixed adsorption protocol. Adsorption dynamics and interfacial rheology are measured on microscale using a microtensiometer platform. Results show that under the same aqueous conditions, the hydrophobic phase impacts the effective areal coverage of particles at the interface. When subjected to nonlinear compression cycles, interfacial jamming is impacted by particle wettability and electrostatic interactions between adsorbed particles. These findings suggest that the nonpolar phase has a significant impact on the lateral interactions between particles at the interface. This work highlights how changes to the hydrophobic fluid introduce additional complexities to the interfacial properties and further the understanding of solid particle interactions at different fluid interfaces for controlled emulsion design.