14 August 2009 in Lab on a Chip
We describe a multi-color microfluidic dye laser operating in whispering gallery mode based on a train of alternating droplets containing solutions of different dyes; this laser is capable of switching the wavelength of its emission between 580 nm and 680 nm at frequencies up to 3.6 kHz—the fastest among all dye lasers reported; it has potential applications in on-chip spectroscopy and flow cytometry.
14 September 2007 in Microfluidics and Nanofluidics
1 January 2006 in Optics Express
Single frequency lasing from organic dye solutions on a monolithic poly(dimethylsiloxane) (PDMS) elastomer chip is demonstrated. The laser cavity consists of a single mode liquid core/PDMS cladding channel waveguide and a phase shifted 15th order distributed feedback (DFB) structure. A 1mM solution of Rhodamine 6G in a methanol and ethylene glycol mixture was used as the gain medium. Using 6 nanosecond 532nm Nd:YAG laser pulses as the pump light, we achieved threshold pump fluence of ~0.8mJ/cm2 and single-mode operation at pump levels up to ten times the threshold. This microfabricated dye laser provides a compact and inexpensive coherent light source for microfluidics and integrated optics covering from near UV to near IR spectral region.
18 February 2019 in Advanced Functional Materials
1 January 2006 in Optics Express
A continuously tunable optofluidic distributed feedback (DFB) dye laser was demonstrated on a monolithic replica molded poly(dimethylsiloxane) (PDMS) chip. The optical feedback was provided by a phase-shifted higher order Bragg grating embedded in the liquid core of a single mode buried channel waveguide. Due to the soft elastomeric nature of PDMS, the laser frequency could be tuned by mechanically stretching the grating period. In principle, the mechanical tuning range is only limited by the gain bandwidth. A tuning range of nearly 60nm was demonstrated from a single dye laser chip by combining two common dye molecules Rhodamine 6G and Rhodamine 101. Single-mode operation was maintained with less than 0.1nm linewidth. Because of the higher order grating, a single laser, when operated with different dye solutions, can provide tunable light output covering the entire spectrum from near UV to near IR in which efficient laser dyes are available. An array of five DFB dye lasers with different grating periods was also demonstrated on a chip. Such tunable integrated laser arrays are expected to become key components in inexpensive advanced spectroscopy chips.
22 January 2013 in Scientific Reports
A flexible technology is proposed to integrate smart electronics and microfluidics all embedded in an elastomer package. The microfluidic channels are used to deliver both liquid samples and liquid metals to the integrated circuits (ICs). The liquid metals are used to realize electrical interconnects to the IC chip. This avoids the traditional IC packaging challenges, such as wire-bonding and flip-chip bonding, which are not compatible with current microfluidic technologies. As a demonstration we integrated a CMOS magnetic sensor chip and associate microfluidic channels on a polydimethylsiloxane (PDMS) substrate that allows precise delivery of small liquid samples to the sensor. Furthermore, the packaged system is fully functional under bending curvature radius of one centimetre and uniaxial strain of 15%. The flexible integration of solid-state ICs with microfluidics enables compact flexible electronic and lab-on-a-chip systems, which hold great potential for wearable health monitoring, point-of-care diagnostics and environmental sensing among many other applications.