26 March 2019 in IEEE Transactions on Plasma Science
Recently, plasma-activated water (PAW) has received extensive attention in food safety field due to its advantages of eco-friendly and high sterilization efficiency. In this paper, the effects of PAW on microbe loads and quality of fresh-cut kiwifruit (FCK) were studied, and the preservation mechanism of PAW on FCK was explored. A 1 mL of PAW and 1 mL of sterile water as control sample were separately sprayed on FCK and stored at 4 °C for 8 days. Compared to the control sample, the microbial population of FCK was reduced by approximately 1.8 log CFU/g after the PAW treatment. The activities of superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) in PAW-treated FCK samples were improved. Further test results showed that H₂O₂ and O₂⁻ accumulation rates of PAW-treated FCK were slower than that of the control sample. Finally, by analyzing the effect of pH and H₂O₂ on the activity of antioxidant enzymes in FCK, it was found that either pH or H₂O₂ treatment could enhance the activities of antioxidant enzymes in FCK. Concerning the fruit quality, our measurement shows that the PAW treatment had no significant effect on the firmness and b* value of FCK.
1 January 2021 in Journal of Environmental Management
13 May 2013 in Applied Physics Letters
Room temperature homogenous dielectric barrier discharge plasma with high instantaneous energy efficiency is acquired by using nanosecond pulse voltage with 20–200 ns tunable pulse width. Increasing the voltage pulse width can lead to the generation of regular and stable multiple current peaks in each discharge sequence. When the voltage pulse width is 200 ns, more than 5 organized current peaks can be observed under 26 kV peak voltage. Investigation also shows that the organized multiple current peaks only appear in homogenous discharge mode. When the discharge is filament mode, organized multiple current peaks are replaced by chaotic filament current peaks.
29 April 2016 in Scientific Reports
In this study, needle-array to plate electrode configuration was employed to generate an atmospheric air diffuse discharge using both nanosecond pulse and sine AC voltage as excitation voltage for the purpose of improving indoor air quality. Different types of voltage sources and electrode configurations are employed to optimize electrical field distribution and improve discharge stability. Discharge images, electrical characteristics, optical emission spectra and plasma gas temperatures in both sine AC discharge and nanosecond pulse discharge were compared and the discharge stability during long operating time were discussed. Compared with the discharge excited by sine AC voltage, the nanosecond pulsed discharge is more homogenous and stable, besides, the plasma gas temperature of nanosecond pulse discharge is much lower. Using packed-bed structure, where γ- Al2O3 pellets are filled in the electrode gap, has obvious efficacy in the production of homogenous discharge. Furthermore, both sine AC discharge and nanosecond pulse discharge were used for removing formaldehyde from flowing air. It shows that nanosecond pulse discharge has a significant advantage in energy cost. And the main physiochemical processes for the generation of active species and the degradation of formaldehyde were discussed.
30 April 2020 in Plasma Sources Science and Technology
In this paper, dielectric columns with different dielectric constants are employed as dielectric materials in the packed bed reactor to investigate the dynamic behaviors of plasma interaction processes. The effects of the dielectric constants (zirconia: ε = 25 and PTFE: ε = 2.5) on the production of reactive species are studied for plasma catalysis applications. Comparison studies of discharge images, electrical characteristics, discharge dynamic evolution and spatial-temporal resolved optical emission spectroscopy are carried on when zirconia and PTFE columns are employed. The results show that there are four discharge processes existing in the packed bed reactor: surface streamer on the dielectric column, local discharge at the contact point, surface discharge on the grounded dielectric plate, and the volume discharge. The production of reactive species such as N 2 (C 3 П u ), N 2 + (B 2 Σ u + ) and O(3p 5 P) depend on the discharge processes to a great extent. The production of the N 2 + (B 2 Σ u + ) always accompanies the formation of the streamer by electrons direct impact process to excite the ground state nitrogen molecules to N 2 + (B 2 Σ u + ). The O(3p 5 P) is generated in two different ways, which plays a major role during the voltage pulse raising and falling time, respectively. The first way is the direct and fast one-step ionization and excitation by high energy electrons with O 2 . The second way is the energy transfer from the nitrogen metastable N 2 (A 3 Σ u + ) and energetic electrons, in which the O is first ionized from O 2 and then excited to O(3p 5 P). Furthermore, compared with a zirconia column, a PTFE column is more conductive to the generation of reactive species.
1 February 2021 in Journal of Hazardous Materials