Aleksej Kiselev

Aleksej Kiselev

Auto-generated profile, based on publicly available information

Aleksej Kiselev

Department of Information Technology, Electrical Engineering and Mechatronics, Mittelhessen University of Applied Sciences, Friedberg, Germany

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 July 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
AKAleksej Kiselev
Aleksej Kiselev
GCGuillermo R. Catuogno
Guillermo R. Catuogno
AKAlexander Kuznietsov
Alexander Kuznietsov
RLRoberto Leidhold
Roberto Leidhold
A fault-tolerant permanent magnet synchronous motor drive is proposed in this paper. The strategy is based on finite control-set model predictive control (FCS-MPC) that is easy to implement and replaces the conventional PI controllers and PWM modulators. A three-phase four-wire converter topology is used, which connects the neutral of the motor to the middle of the DC-link in a capacitive divider. The main contribution of the proposed strategy relies on the fact that no reconfigurations or modifications of the converter topology and controller strategy are required from normal operation to post-fault operation. As result, the transition from healthy to faulty state is smooth and not noticeable in the torque waveform. In addition, a simple fault detection method is derived by using the predicted variables. Experimental results, obtained from a laboratory prototype, validate the practical feasibility of the proposed strategy and shows a pulsation-free torque on fault operation.

7 February 2025 in Astronomy & Astrophysics
Verified
Journal Article
Open access
PDF file
TMTony Mroczkowski
Tony Mroczkowski
PGPatricio A. Gallardo
Patricio A. Gallardo
MTMartin Timpe
Martin Timpe
AKAleksej Kiselev
Aleksej Kiselev
MGManuel Groh
Manuel Groh
TZThomas Zimmerer
Thomas Zimmerer
The (sub)millimeter sky contains a vast wealth of information that is both complementary and inaccessible to other wavelengths. Over half the light we receive is observable at millimeter and submillimeter wavelengths, yet we have mapped only a small portion of the sky at sufficient spatial resolution and sensitivity to detect and resolve distant galaxies or star-forming cores within their large- scale environments. For decades, the astronomical community has highlighted the need for a large, high-throughput (sub)millimeter (λ ~ 0.35–10 mm) single dish. The Atacama Large Aperture Submillimeter Telescope (AtLAST), with its 50-m aperture and 2° maximal field of view, aims to be such a facility. We present here the preliminary design concept for AtLAST, developed through an EU Horizon 2020-funded design study. Our design approach begins with a long lineage of (sub)millimeter telescopes, relies on calculations and simulations to realize the optics, and uses finite element analysis to optimize the conceptual designs for the mechanical structure and subsystems. The demanding technical requirements for AtLAST, set by transformative science goals, have motivated the design effort to combine novel concepts with lessons learned from previous efforts. The result is an innovative rocking chair design with six instrument bays, two of which are mounted on Nasmyth platforms, inside a large receiver cabin. Ultimately, AtLAST aims to achieve a surface accuracy of a ≤20 µm root mean square half wavefront error, corresponding to the goal of a Ruze efficiency of >50% at 950 GHz. We conclude that a closed-loop metrology of the active primary surface will be required to achieve our surface accuracy goal. In the next phase of the project, we shall prototype and test such a metrology on existing platforms, with the goal of delivering a mature, construction-ready design by the end of this decade.

1 January 2017
Verified
Conference Paper
Closed access
AKAleksej Kiselev
Aleksej Kiselev
AKAlexander Kuznietsov
Alexander Kuznietsov
RLRoberto Leidhold
Roberto Leidhold
In this paper, a model based fault detecting algorithm for detection of inter-turn short circuits in permanent magnet synchronous motors (PMSMs) is presented. Based on the PMSM model, the algorithm compares predicted values of the current space vector with the measurements to calculate an error vector, which will be used to detect the fault. A significant advantage of the developed algorithm is the ability to detect an inter-turn short circuit also during transients, i. e. at variable speed and while changes of dq-axis current space vector. Furthermore, the algorithm does not use any frequency transformation, which results in low computational cost and avoids high storage requirement.

1 June 2016
Verified
Conference Paper
Closed access
AKAleksej Kiselev
Aleksej Kiselev
AKAlexander Kuznietsov
Alexander Kuznietsov
RLRoberto Leidhold
Roberto Leidhold
In this paper, the generalized predictive control (GPC) algorithm is introduced to control the position of a permanent magnet synchronous motor (PMSM). For this aim, the CARIMA model of PMSM is derived and the theoretical basics of multivariable GPC are described. In order to reduce computational burden, the GPC algorithm is extended by approach of using Laguerre functions. In conclusion, the HiL simulation results of PMSM position control, given by GPC algorithm are compared to the results of the conventional field oriented control (using PI controllers).

1 December 2014
Verified
Conference Paper
Closed access
AKAleksej Kiselev
Aleksej Kiselev
AKAlexander Kuznietsov
Alexander Kuznietsov
In this paper, the generalized predictive control (GPC) algorithm is introduced to control a permanent magnet synchronous motor (PMSM) drive of a full-electric vehicle (EV). For this aim, the CARIMA model of PMSM is derived and the theoretical basics of GPC are described. Following, the GPC algorithm is extended by consideration of the voltage constraints, given by the vehicle battery. In conclusion, the simulation results of an electric vehicle, driven by GPC controlled PMSM, are compared to the field oriented control based EV drive.

1 February 2018
Verified
Conference Paper
Closed access
AKAleksej Kiselev
Aleksej Kiselev
AKAlexander Kuznietsov
Alexander Kuznietsov
RLRoberto Leidhold
Roberto Leidhold
In this paper, the research emphasis focuses on the investigation of tracking performance, provided by generalized predictive control (GPC) algorithm as position controller for a permanent magnet synchronous motor (PMSM). For this aim, a previously developed Laguerre functions extended GPC algorithm with explicit current and voltage constraint consideration is used for tracking a pre-known reference position trajectory. In order to evaluate the GPC tracking performance, the obtained results are compared to the tracking results, provided by the conventional PI-based field oriented control (FOC).