6 January 2024 in Journal of Molecular Liquids
31 May 2019 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
A novel solid acid catalyst was prepared from the palm-fruit-bunch by in-situ incomplete sulphonation carbonization method. The prepared catalyst was characterized to determine its physical and chemical properties which are determine its performance in a reaction. The catalyst was then subjected to esterification and transesterification reactions to produce biodiesel from high free fatty acid (FFA) Calophyllum inophyllum (C. inophyllum) oil. An optimum yield of 88.5 wt% methyl ester was achieved at 4 wt% of catalyst, methanol to oil molar ratio of 21:1 and a reaction temperature of 60ºC in 180 min. The fuel properties of the biodiesel were analyzed as per ASTM standard methods, and their properties were found to be in accordance with ASTM D6751.
1 March 2025 in Petroleum Research
24 June 2019 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
YGYash Hiteshkumar Gandhi
This study makes use of an acid catalyst prepared from cotton stalks by carbonization and sulphonation methods which is then characterized using different analytical methods. Furthermore, catalytic activity was studied by subjecting it to single step esterification and transesterification reactions of Madhuca indica oil with methanol. The different factors influencing the reaction process were identified and optimized. The optimum process conditions were found to be: 5 wt% of catalyst; 18:1 molar ratio of methanol to oil; temperature of 60°C; reaction time 5 h resulting in a yield of 89.2 wt% biodiesel. The catalyst was recycled and reused up to seven times without much loss in catalytic activity. The fuel properties of the synthesized biodiesel were determined and compared to the ASTM D 6751 standard.
28 September 2026 in SSRN Electronic Journal
YSYogesh Kumar Srivastava
+1
Flexible and wearable electronics require lightweight, sustainable, and self-powered energy sources beyond conventional batteries and supercapacitors. Thermoelectric (TE) materials offer a promising solution by converting heat directly into electricity without vibration or emissions and ensuring long-term stability. Although inorganic TE materials such as Bi2Te3 exhibit high efficiency, but their brittleness, toxicity and high-cost limit use in flexible systems. In this study, we develop a low cost and eco-friendly thermoelectric composite based on pencil-grade graphite paint using biodegradable Gum Arabic polymer binder. The composite demonstrates enhanced thermoelectric properties, driven by interfacial interactions and defect-induced carrier modulation. These effects lead to an increased power factor by eight times (~16 µW/mK2) on paper substrate, highlighting the potential of pencil-grade graphite as a sustainable and scalable material for printed and wearable thermoelectric devices. This study present a simple, low-cost, and sustainable strategy for large-scale fabrication of flexible thermoelectric systems suitable for energy harvesting applications.