Postdoctoral Research Associate, Dept. of Civil and Environmental Engineering and Earth Sciences, Univ. of Notre Dame, Notre Dame, IN 46556; formerly, Postdoctoral Scholar, School of Civil and Construction Engineering, Oregon State Univ., Corvallis, OR 97330.. ORCID:
Auto-generated profile, based on publicly available information
Mohammad Shafiqual Alam
Postdoctoral Research Associate, Dept. of Civil and Environmental Engineering and Earth Sciences, Univ. of Notre Dame, Notre Dame, IN 46556; formerly, Postdoctoral Scholar, School of Civil and Construction Engineering, Oregon State Univ., Corvallis, OR 97330.. ORCID:
A probabilistic framework is presented for the development of physics and simulation-based parametrized tsunami fragility functions for structures accounting for structural member failures. The proposed framework is general and accounts for material and geometric sources of uncertainty and makes use of nonlinear finite-element structural models and the first-order second-moment (FOSM) reliability method. The application of the framework is illustrated with the development of parametrized fragility functions for an example reinforced concrete moment frame building designed to recent United States codes. Results indicate that explicit consideration of structural member failures is of paramount importance because the fragility functions based on global failure criteria that do not account for member failures tend to overpredict damage state capacities. Among the several sources of uncertainty considered, breakaway openings in the building are the dominant contributor to the uncertainty in the structural capacity. In addition, the estimation efficiency of several scalar and vector-valued intensity measures as predictors of structural damage is evaluated using the logistic regression method. The intensity measures considered consist of inundation depth, flow velocity, specific momentum flux, kinematic moment of specific momentum flux, and their interactions. The estimation efficiency of vector-valued intensity measures is found to be higher than that of scalar intensity measures. Among the scalar intensity measures analyzed, those that combine information of inundation depth and flow velocity are identified to be the most efficient predictors of structural damage, and therefore are considered to be the preferred measures to characterize the intensity of tsunami hazards for practical applications.
1 April 2019 in International Journal of Disaster Risk Reduction
This paper presents a methodology for probabilistic hazard assessment for the multi-hazard seismic and tsunami phenomena [probabilistic seismic and tsunami hazard analysis (PSTHA)]. For this work, a full-rupture event along the Cascadia subduction zone is considered and the methodology is applied to a study area of Seaside, Oregon, which is located on the US Pacific Northwest coast. In this work, the annual exceedance probabilities (AEPs) of the tsunami intensity measures (IMs) are shown to be qualitatively dissimilar to the IMs of the seismic ground motion in the study area. Specifically, the spatial gradients for the tsunami IM are much stronger across the length scale of the study area owing to the physical differences of wave propagation and energy dissipation of the two mechanisms. Example results of probabilistic seismic hazard analysis and probabilistic tsunami hazard analysis are shown for three observation points in the study area of Seaside. For the seismic hazard, the joint mean annual rate of exceedance of IMs shows similar trends for the three observation points, even though for a given observation point there is a large scatter between two ground-motion IMs analyzed, which were peak ground acceleration (PGA) and spectral acceleration at a period of vibration of 0.3 s, i.e., PGA and Sa (T1 = 0.3 s). For the tsunami hazard, the joint AEP of maximum flow depth (hmax) and maximum momentum flux ((MF)max) shows a high correlation between the two IMs in the study area. The joint AEP at each of the three observation points follows a particular Froude number (Fr) due to the local site-specific conditions rather than the distributions of fault slip distributions used to generate the scenarios that are the basis of the AEP maps developed. The joint probability distribution of hmax and (MF)max throughout the study region falls between 0.1 ≤ Fr < 1.0 (i.e., the flow is subcritical), regardless of return interval (500-, 1,000-, and 2,500-year). However, the peak of the joint probability distribution with respect to hmax and (MF)max varies with the return interval, and the largest values of hmax and (MF)max were observed with the highest return intervals (2,500 years) as would be expected. The results of the PSTHA can be the basis for a probabilistic multi-hazard damage and loss assessment and help to evaluate the uncertainties of the multi-hazard assessments.
1 July 2020 in Journal of Waterway, Port, Coastal, and Ocean Engineering
During a tsunami event, neighboring structures can significantly influence the forces experienced by an individual structure within an urban community. To assess the effects of adjacent structures on the resulting fluid flow, and the corresponding pressures and forces exerted on a structure, two tsunami-like waves were generated in the Large Wave Flume at the Hinsdale Wave Research Laboratory (HWRL) at Oregon State University. The forces and pressures on an elevated structure were measured for a reference geometry without neighboring structures, as well as for five structure configurations that included one or two neighboring structures arranged in layouts meant to be representative of prototypical rectangular buildings in subsections of a coastal community. Results showed that adjacent structures can shield a structure from the flow, causing decreased total forces with increasing blockage ratios. However, local channelization of the flow was found to increase local pressures, increasing the demands on structural components. Comparisons with ASCE 7-16 methods for determining force increase ratios due to channeling showed strong agreement for channeling-dominated configurations and bore-like waves that broke before impacting the elevated structure. In contrast, shielding-dominated configurations and waves that were unbroken on impacting the elevated structure showed that the ASCE 7-16 methods would overestimate force increase ratios.