1 January 2022 in Physics of Fluids
The influences of serrated trailing edge on the aerodynamic and aeroacoustic performance of a flapping wing during hovering flight are investigated using a hybrid framework of an immersed boundary Navier–Stokes solver for the flow field and the Ffowcs Williams–Hawkings (FW–H) analogy for the sound field. A rigid rectangular wing with an aspect ratio of 2 undergoes pitching and stroke motions at a Reynolds number (Re) of 310 and a Mach number (M) of 0.012. Simulations are conducted by varying the dimensionless wavenumber from to and wave amplitude from 0.25 to 1.0. We find that at and (D4), the average sound power level is reduced by up to 6.8 dB within the Strouhal number (St) between 2.0 and 4.0 compared to that of a plain trailing edge while the lift coefficient is maintained. The directivity at St = 0.2, St = 0.4, St = 2.2, and St = 2.4 is discussed. It is found that the serrations of D4 do not affect the directivity for the first two frequencies and significantly reduce the magnitude of the directivity for the last two frequencies. The serrations of D4 considerably alter the flow field near the wing surface and reduced the surface pressure fluctuations near the wing tip, leading to the noise reduction. The lift coefficient of D4 is not significantly changed, because the reduction in the pressure-contributed lift is compensated by an increase in the shear stress-contributed lift. The serrations with higher and have larger shear stress-contributed lift.
9 July 2024 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
1 December 2024 in Physics of Fluids
This study investigates self-excited oscillations of three-dimensional collapsible tubes conveying both laminar and turbulent flows, using an immersed boundary-lattice Boltzmann method. The effects of Reynolds number (Re) on these oscillations are explored, revealing that at Re = 200, periodic vortex shedding downstream of the tube throat induces small-amplitude, quasi-periodic self-excited oscillations. Notably, stress concentrations near the downstream end of the elastic tube lead to the formation of two regions of wall thickening, which may predispose the elastic tube to fatigue failure. At higher turbulent flow conditions (Re = 1000), flow bifurcation occurs, resulting in large-amplitude, quasi-periodic oscillations. These oscillations are similarly driven by vortex shedding, which imparts periodic perturbations onto the elastic tube wall. Additionally, analysis at two monitoring points within the downstream rigid tube reveals small secondary oscillations in pressure and streamwise velocity. These secondary oscillations are attributed to the merging jets and their interactions within the downstream rigid tube.
1 August 2025 in Physics of Fluids
The aeroacoustic characteristics of a two-dimensional (2D) plunging SD7003 airfoil at a Reynolds number of 10 000 are investigated using direct numerical simulations (DNS) based on an in-house 2D high-fidelity compressible Navier–Stokes solver. The plunging frequency is fixed as 1.25, while the Mach number is varied between 0.1, 0.2, and 0.3, denoted as M1, M2, and M3, respectively. The mean and root mean square values of the surface pressure coefficients at M3 are substantially different from those at M1 and M2, which is connected with the leading edge (LE) shear layer evolutions. Surface pressure fluctuations are found to be the dominant noise sources for all three Mach numbers. For the second harmonic (2fo), the airfoil is no longer acoustically compact for these three cases. This results in a sound pressure magnitude scaling different from M2.5. In particular, the power spectral magnitude and phase angle of the surface pressure jump (Δp) between the suction and pressure sides of M3 show a large magnitude near the trailing edge and a less destructive phase distribution near the LE, respectively. To enable rapid acoustic predictions, a compact linear model is developed by combining the Theodorsen model and Ffowcs Williams–Hawkings acoustic analogy, showing good agreement with DNS results.
3 November 2025 in Journal of Fluid Mechanics
A heaving and pitching wing encountering effective angle-of-attack perturbations at the Reynolds numbers of 2000 and 20 000 is numerically studied by using an immersed boundary–lattice Boltzmann method. The perturbations are introduced as an abrupt heaving or pitching motion superposed on the baseline motion. It is found that the lift increment scales with the increase in the perturbation effective angle of attack, especially during the heaving perturbation. The pitching perturbation is more likely to disrupt this scaling due to the transition of the leading-edge vortex (LEV) detachment mechanism, where the detachment mechanism of the LEV transitions from bluff-body shedding dominant to vorticity layer eruption dominant. Despite the same variation in the effective angle of attack for the heaving and pitching perturbations, vorticity layer eruption is more likely to occur under the fast pitching perturbation. When the Reynolds number is increased to 20 000, the time histories of aerodynamic force are similar to those at the Reynolds number of 2000. Moreover, the boundary layer under the LEV is more resistant to the adverse pressure gradient, leading to greater variability in vorticity layer eruption.
1 June 2026 in Physics of Fluids
The effects of non-Newtonian rheology on the dynamics of three-dimensional collapsible tube systems are investigated numerically using an immersed boundary-lattice Boltzmann method coupled with a finite element structural solver. A power-law constitutive model is employed to characterize shear-dependent viscosity effects across a wide range of power-law indices (n=0.7–2.0). The results reveal that fluid rheology significantly modifies the system's dynamic response and apparent stability: shear-thickening fluids (n>1) stabilize the collapsible tube and suppress flow-induced oscillations, while shear-thinning fluids (n<1) promote instability and trigger self-excited oscillations. Mechanistically, shear-thinning effects amplify local velocity gradients in collapsed regions, enhancing fluid–structure coupling and destabilizing the system. In contrast, shear-thickening effects increase effective viscosity in the high-shear areas, providing mechanical damping that suppresses oscillations. The rheological properties significantly affect both structural deformation patterns and the pressure drop—flow rate relationship, with these effects demonstrating the critical importance of accounting for non-Newtonian behavior in physiologically and technologically relevant applications.