Currently, advanced technologies have been developed to reduce energy consumption and carbon emissions. The fact that the building envelope causes energy losses of up to 73% leads to the search for the right solutions in the design of building systems. Providing human comfort in interiors with current design strategies would decrease the need for using active systems and bring along energy gains. As a result, less fuel will be consumed, and fewer emissions will be generated, contributing to a healthier environment on a global scale. In the scope of this study it is aimed to evaluate different facade applications on a reference building for three provinces located in different climate zones, which are Karabük, Konya, and Mersin in Turkey. In addition, façade scenarios in the direction of east-west and north-south axes were evaluated to determine the energy waste or gains caused by orientation. The scenarios were analyzed considering heating-cooling energy demand, thermal comfort, carbon emissions, and payback periods. REVIT and Design Builder were used for 3D modeling and simulations. Results indicated that an opaque ventilated wall is the most advantageous scenario for the Mediterranean climate zone in all parameters. This façade system performs better than the others in reducing carbon emissions and saving costs for all the regions. Although the solar chimney makes a significant contribution to the reduction of especially heating loads for all regions, this system is not applicable when the payback period is considered. In terms of thermal comfort, southward orientation minimizes the humidity and temperature fluctuations indoors throughout the year.
The utilization of waste‐based thermal energy‐storing building materials in construction is a significant advancement in the reduction of the environmental impact of human activities. Such materials provide thermal comfort, reduce energy consumption, and promote the use of renewable resources. Phase change materials (PCM) have been the subject of these achievements in recent years regarding their heat storage potentials. On the other hand, the utilization of waste is of significant consequence with regard to the sustenance of a circular economy and the alleviation of waste‐related environmental concerns. However, the majority of studies on PCM in the literature tend to concentrate on the thermal, physical, chemical, and mechanical properties of the materials, and thus fails to provide a comprehensive perspective on the sustainability of these materials. In this study, 11 articles selected from a total of 178 studies aiming to produce building materials with waste‐PCM combinations are analyzed according to five categories related to sustainable built environment, which are resource use, environmental impact, health, comfort, and cost. As a result, it is proved that composite building materials that contain waste and store thermal energy have the potential to contribute significantly to sustainable architecture.
Tarihi yapılar günümüz şartlarına uyum sağlayabilmeleri ve varlıklarını sürdürebilmeleri adına çeşitli müdahalelere ihtiyaç duyabilmektedir. Bu süreçte yapılarda tespit edilen sorunların yenilikçi bir çerçevede ele alınarak tarihi dokuya ve çevreye zarar vermeden giderilmesi gerekir. Bu çalışmada yıllar içerisinde tarihi yapılarda görülen aksaklıklar ve ihtiyaçlar ele alınarak bunların yapı malzemesi ölçeğinde giderilmesine yönelik çözüm önerileri sunulmuştur. Çalışmanın metodolojisine göre, nem sorunu, enerji performansı, termal konfor, çevresel etkiler ve iç mekân hava kalitesi olarak belirlenen beş farklı kategoride son on yılda literatüre kazandırılmış olan çalışmalar incelenmiştir. Bu çalışma, yeni malzeme ve teknoloji kullanımının tarihi çevre kadar doğal çevreye olan etkilerinin de incelenmesi açısından bilinçlendirici bir yaklaşıma sahiptir.
31 December 2025 in Journal of Construction Engineering, Management & Innovation
Fit-out waste generated during building refurbishments has significant environmental consequences, accounting for substantial portions of construction and demolition waste. Over a 50-year lifespan, the total waste generated by a rentable office was found to be approximately four times higher than that of a standard office, while implementing openplan layouts and movable partitions reduced embodied energy by up to 61.3% and embodied energy loss by 84.3%, respectively.This study investigates the effectiveness of flexible interior strategies—open-plan layouts and movable partition systems—in mitigating the environmental impacts associated with fit-out waste in rentable offices. The analysis, structured around three hypotheses and four office typologies, covers the production, replacement, and refurbishment stages of the building life cycle and evaluates total waste, life cycle embodied energy (LCEE), and embodied carbon (EC).The findings highlight that flexibility-oriented design strategies can significantly reduce material turnover and resource inefficiency in the building sector. However, strategies such as recycling, reuse, and the economic aspects of the interventions are excluded from the scope of this study.