1 June 2021 in Journal of Green Building
This study focused on creating a sustainable composite material using blast furnace dust of the iron-steel industry and plastic wastes of the plastic industry in order to reduce the embodied energy of the material and generate more sustainable material. In this study, varying amounts of blast furnace dust (BFD), which is the primary iron-steel industry waste and which is used as filler for recycled low-density polyethylene (LDPE), was mixed to create the composite material. The embodied energy, emissions to water and air (volatile organic compounds) of BFD filled LDPE composites were determined. It was found that the composite materials had less embodied energy compared with polymer-based flooring materials such as epoxy, polyurethane (PU) and polyvinylchloride (PVC). In addition, it was determined that the composite material did not release emissions to water and have fewer total volatile organic compounds (TVOCs). These results showed that the produced composite material could be used in buildings as a sustainable floor coating material, thus saving raw materials and supporting indoor air quality and recycling.
1 April 2020 in European Journal of Science and Technology
Akıllı malzemeler, ısı, sıcaklık, mekanik ve manyetik etkilerle değişim gösterebilen veya bu etkilere tepki verebilen malzemelerdir. Bu malzemeler yapıda kullanıldıklarında, daha fazla enerji üreten, daha az su tüketimi sağlayan, daha az sarf malzeme ve kaynak kullanımını başaran yapıların üretilmesine katkı sağlamaktadır. Malzemelerin yapıda doğru ve etkin bir şekilde kullanımı, mimarlık eğitiminin önemli bir parçasıdır. Bu çalışma, günümüzde yapıda kullanılan akıllı malzemelere yönelik ön bilginin ardından, Karabük Üniversitesi Mimarlık Fakültesi son sınıf öğrencilerinin Çağdaş Yapı Malzemeleri dersi kapsamındaki stüdyo deneyimi çıktıları üzerinden, Karabük’te yer alan üç farklı kamu yapısının akıllı malzemelerle yeniden kurgulanmasını sorgulamaktadır. Öncesinde akıllı malzemelerin teorik altyapısının aktarıldığı derste, öğrencilerden teorik altyapıyı kullanarak Karabük’te kamu yapılarını yeniden ele almaları ve akıllı malzemeler üzerinden stüdyo ortamında uzun soluklu olarak bu yapıların malzemelerini yeniden kurgulamaları istenmiştir. Ders kapsamında seçilen Karabük Valilik Binası, Safranbolu Meslek Yüksekokulu ve Karabük Üniversitesi Eğitim ve Araştırma Hastanesi gibi bir hizmet, bir eğitim ve bir sağlık yapısına yönelik yapılan detaylı inceleme ve kurgulamalar sonucunda çıkan analizler ve görseller incelendiğinde, kamu yapılarında akıllı malzeme kullanımı ile işlevselliğin, görsel algının, ısıl ve görsel konforun, çevre koşullarına uyum ve enerji etkinliğinin artırılabileceği gözlenmiştir.
30 June 2024 in ICONARP International Journal of Architecture and Planning
In modern life, strategies developed in line with the increasing energy demand cause many environmental problems on a global scale. One of the most important of these problems is inadequate indoor air quality. The most critical parameters affecting indoor air quality during the design phase are selecting wrong and unhealthy building products, insufficient window sizes, and unplanned natural ventilation. This study investigates whether indoor air quality can be improved only by effective natural ventilation methods, without compromising thermal comfort, through small changes that can be applied to buildings. For this purpose, simulation studies were carried out to reveal whether indoor air quality could be improved without compromising thermal comfort in a library building. As a result, when evaluating the improvement recommendations, the thermal comfort range for the cross-ventilation and chimney effect ventilation recommendations is 'comfortable' in winter and 'comfortable-partially comfortable' in summer. For the ventilation recommendations with roof wings, skylights and wind towers, the thermal comfort range for summer and winter remained in the "comfortable" range due to the high natural ventilation performance.
24 February 2021 in JOURNAL OF AWARENESS
Within the scope of the study, thermal comfort analysis was performed using the ENVI-met program of the Misak-ı Milli Square in Safranbolu, and it was determined that the thermal comfort perception of the square as slighty warm-warm. For this reason, a new design proposal has been submitted for the square. In the proposal, the green ratio and the number of trees was increased, the type and location of the trees was changed. The flooring materials was replaced with a stone covering with a higher albedo and new functional suggestions were made for the square. As a result of the thermal comfort analysis of the new proposal, the thermal comfort perception in the square was neutral and the thermal dissatisfaction rate was reduced below 14.5%. In result of the study, it was underlined that the ratio of green areas and the tree type, number and location that constitute it and the choice of flooring materials are important parameters in providing the thermal comfort of the square.
2 March 2025 in Engineering Reports
The utilization of waste‐based thermal energy‐storing building materials in construction is a significant advancement in the reduction of the environmental impact of human activities. Such materials provide thermal comfort, reduce energy consumption, and promote the use of renewable resources. Phase change materials (PCM) have been the subject of these achievements in recent years regarding their heat storage potentials. On the other hand, the utilization of waste is of significant consequence with regard to the sustenance of a circular economy and the alleviation of waste‐related environmental concerns. However, the majority of studies on PCM in the literature tend to concentrate on the thermal, physical, chemical, and mechanical properties of the materials, and thus fails to provide a comprehensive perspective on the sustainability of these materials. In this study, 11 articles selected from a total of 178 studies aiming to produce building materials with waste‐PCM combinations are analyzed according to five categories related to sustainable built environment, which are resource use, environmental impact, health, comfort, and cost. As a result, it is proved that composite building materials that contain waste and store thermal energy have the potential to contribute significantly to sustainable architecture.
27 May 2021 in JOURNAL OF AWARENESS
Dünya genelinde yaygın bir salgın oluşturan COVID-19 virüsü, yaşamı ciddi anlamda tehdit etmeye devam etmektedir. Virüsün temas ve damlacık saçılması yolu ile yayılması, toplu ve sosyal yaşam alanlarının boşaltılmasını, insanların evlerinde bireysel korunmalarını gerektirse de, bu durum ekonomik, psikolojik ve fizyolojik açıdan pek mümkün görünmemiştir. İlk vaka tespiti ile uzaktan eğitime geçilen eğitim sistemi, salgından büyük oranda etkilenmiştir. Salgının seyrinin azalmasına bağlı olarak “kontrollü sosyal yaşam” ile “kontrollü eğitim”e geçilen okullarda salgının kontrolü, öğrencilerin virüsten etkilenmesinin engellenmesi açısından büyük önem arz etmektedir. Okullarda kontrollü eğitime yönelik alınması gereken tedbirler ve uyulması gereken kuralların incelenmesi ve buna bağlı olarak yeniden kullanım değerlendirmesi, mimari ve mühendislik kontrolü ile salgınla mücadele edilmesinin en önemli yoludur. Bu bağlamda çalışma, kontrollü sosyal yaşam üst başlığında ele alınan kontrollü eğitim tedbirlerini ve eğitim yapılarında salgın yönetimi ve sağlıklı ortamların geliştirilmesine yönelik kuralları farklı rehberlerden okuyarak, seçilen eğitim yapıları üzerinden yeniden kullanım değerlendirmesini içermektedir. Buna ek olarak çalışma, salgının kontrolü açısından mimari ve mühendislik kontrollerinin yanı sıra, yapının tasarım evresinde ele alınması gereken salgın riskinin yapılarda göz ardı edilmemesi gerektiğini savunmaktadır.