26 April 2022 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The bistatic interferometric coherence is affected by different sources of error, among which volume decorrelation, which quantifies the amount of noise caused by volume scattering mechanisms. The magnitude of volume decorrelation can be derived from the total interferometric coherence by properly compensating for all other decorrelation sources. In the scientific community, it is common practice to approximate the volume decorrelation with the coherence or to compute it by compensating for the signal-to-noise ratio (SNR) decorrelation only, which typically represents the predominant decorrelation component. The aim of this work is to assess the impact of different decorrelation sources in detail and to provide the readers with a practical procedure for a precise computation of the volume decorrelation from TanDEM-X bistatic data. In particular, we concentrate on the two most relevant decorrelation components: the SNR and the quantization components. Regarding the former, we estimate the noise equivalent sigma nought directly from real SAR data and we provide the users with a set of polynomial coefficients for the retrieval of the system noise floor for each operational TanDEM-X StripMap beam used for the generation of the global Digital Elevation Model (DEM). Concerning the latter, we analyze its dependency on the backscatter local statistics and quantization rate and we provide the reader with a set of empirical look-up-tables (LUT) for quantifying its impact on the coherence. Finally, we provide reasonable assumptions for all other remaining decorrelation sources, discussing two application scenarios.
23 December 2024 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Digital elevation models (DEM) derived from TanDEM-X single-pass interferometric SAR data are widely used for a large vary of applications. One of the main application fields regards the monitoring of topographic changes, which can be properly estimated by differentiating two DEM scenes acquired at different times. In this scenario, a critical aspect is represented by the precise mutual calibration of the two DEMs, which are normally affected by residual offsets and tilts caused by uncertainties in the baseline determination. This calibration is in general performed by utilizing reference tie-points, whose location and height is known a priori, or estimated through other reference sensors, such as GPS or LiDAR data. The manual procedure is time-consuming and can be jeopardized by the absence of available external reference points. In this paper, we present a novel technique for performing an automatic selection of reliable natural tie-points from Sentinel-1 repeat-pass timeseries, by exploiting persistent scatterers candidates, and we discuss their applicability to TanDEM-X data. We propose a novel method for retrieving a set of reliable natural calibration targets and for performing an effective mutual calibration of TanDEM-X time-tagged DEMs. The approach is validated by considering the estimation of lava field volumes in the test-case scenario of the volcanic eruptions in the Reykjanes Peninsula, Iceland, occurred between 2021 and 2023. Thanks to the continuous global coverage of Sentinel-1, this approach can be applied when no a priori knowledge on reference tie-points is available, allowing for the precise estimation of height and volume changes.
4 December 2023 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The radiometric calibration of spaceborne SAR products plays a key role for ensuring a good performance of the whole end-to-end system and requires a precise knowledge of both the radar system and the illuminated target on ground. The shape of the antenna pattern in elevation can be directly estimated by analyzing SAR detected images in presence of a homogeneous and flat backscatter profile in the slant range dimension. To this aim, tropical rainforests have been established by the SAR community as well-known calibration sites for performing such an activity. Here, according to the hypothesis of isotropic scattering, the backscattering coefficient in terms of unit area perpendicular to the antenna, called gamma nought, is assumed to remain constant with respect to the incidence angle. Nevertheless, several studies using X- and C-band sensors have shown a slight dependency of the backscatter on the incidence angle, as well as on ground target properties and meteorological conditions. In this work, we present a detailed statistical characterization of radar backscatter at X-band over the Amazon rainforest using TanDEM-X data and we provide insights on how to best utilize radar backscatter data in this region for SAR calibration and modeling purposes. In particular, we concentrate on the dependency of the Amazon rainforest backscatter on the day-time of acquisition, which is directly related to the orbit direction of TanDEM-X. Furthermore, we analyze the seasonal variation of the radar backscatter, as well as possible radiation variations over different locations in the Amazon, characterized by different climate conditions and biomes. Finally, we provide a series of backscatter models for different scenarios, which can be used, e.g., for X-band spaceborne SAR system design and theoretical modeling.
14 January 2026 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The increasing use of artificial intelligence (AI) models in Earth Observation (EO) applications, such as forest height estimation, has led to a growing need for explainable AI (XAI) methods. Despite their high accuracy, AI models are often criticized for their “black-box” nature, making it difficult to understand the inner decision-making process. In this study, we propose a multifaceted approach to XAI for a convolutional neural network (CNN)-based model that estimates forest height from TanDEM-X single-pass InSAR data. By combining domain knowledge, saliency maps, and feature importance analysis through exhaustive model permutations, we provide a comprehensive investigation of the network working principles. Our results suggests that the proposed model is implicitly capable of recognizing and compensating for the SAR acquisition geometry-related distortions. We find that the mean phase center height and its local variability represents the most informative predictor. We also find evidence that the interferometric coherence and the backscatter maps capture complementary but equally relevant views of the vegetation. This work contributes to advance the understanding of the model’s inner workings, and targets the development of more transparent and trustworthy AI for EO applications, ultimately leading to improved accuracy and reliability in the estimation of forest parameters.