Achieving broadband absorption has been a topic of intensive research over the last decade. However, the costly and time consuming stage of lithography has always been a barrier for the large-area and mass production of absorbers. In this work, we designed, fabricated, and characterized a lithography-free, large-area compatible, omni-directional, ultra-broadband absorber that consists of the simplest geometrical configuration for absorbers: Metal-Insulator-Metal (MIM). We introduced and utilized Manganese (Mn) for the first time as a very promising metal for broadband absorption applications. We optimized the structure step-by-step and compared Mn against the other best candidates introduced so far in broadband absorption structures and showed the better performance of Mn compared to them. It also has the advantage of being cheaper compared to metals like gold that has been utilized in many patterned broadband absorbers. We also presented the circuit model of the structure. We experimentally achieved over 94 percent average absorption in the range of 400–900 nm (visible and above) and we obtained absorption as high as 99.6 percent at the wavelength of 626.4 nm. We also experimentally demonstrated that this structure retains broadband absorption for large angles up to 70 degrees.
In this paper, we propose a methodology to maximize the absorption bandwidth of a metal-insulator-metal (MIM) based absorber. The proposed structure is made of a multilayer design. At the initial step, the optimum MIM planar design is fabricated and optically characterized. The results show absorption above 0.9 from 400 nm to 850 nm. Afterward, the transfer matrix method is used to find the optimal condition for the perfect light absorption in an ultra-broadband frequency range. This modeling approach predicts that changing the filling fraction of the top Cr layer can extend light absorption toward longer wavelengths. We experimentally proved that the use of proper top Cr thickness and annealing temperature leads to a nearly perfect light absorption from 400 nm to 1150 nm, which is much broader than that of a planar design. Therefore, while keeping the overall process lithography-free, the absorption functionality of the design can be significantly improved. The results presented here can serve as a beacon for future performance-enhanced multilayer designs where a simple fabrication step can boost the overall device response without changing its overall thickness and fabrication simplicity.
In this work, we propose an optimum unit cell arrangement to obtain near absolute polarization insensitivity in a metal-insulator-metal (MIM) based ultra-broadband perfect absorber. Our findings prove that upon utilizing this optimum arrangement, the response of the absorber is retained and unchanged over all arbitrary incidence light polarizations, regardless of the shape of the top metal patch. First, the impact of the geometry of the top nanopatch resonators on the absorption bandwidth of the overall structure is explored. Then, the response of the MIM design for different incidence polarizations and angles is scrutinized. Finally, the proposed design is fabricated and characterized.
9 July 2019 in Journal of the Optical Society of America B
Achieving nearly perfect light absorption from the microwave to optical region utilizing metamaterials has begun to play a significant role in photonics and optoelectronics due to their vital applications in thermal emitters, thermal photovoltaics, photovoltaics, sensing, filtering, and photodetection. However, employing passive components in designing perfect absorbers based on metamaterials and photonic crystals imposes some limits on their spectral operation. In order to overcome those limits, extensive research has been conducted on utilizing different materials and mechanisms to obtain active metamaterial light absorbers. In this review paper, we investigate the recent progress in tunable and reconfigurable metamaterial light absorbers through reviewing different active materials and mechanisms, and we provide a perspective for their future development and applications.
We report ultra-broadband perfect absorbers for visible and near-infrared applications that are based on multilayers of metal-insulator (MI) stacks fabricated employing straightforward layer deposition techniques and are, therefore, lithography-free and large-scale compatible. We scrutinize the impact of different physical parameters of an MIMI absorber structure with analysis of each contributing metal layer. After obtaining the optimal design parameters (i.e. material selection and their thicknesses) with both simulation and numerical analysis (Transfer Matrix Method) methods, an experimental sample is fabricated and characterized. Our fabricated MIMI absorber consists of an optically thick tungsten (W) back reflector layer followed by 80 nm aluminum oxide (Al2O3), 10 nm titanium (Ti), and finally another 80 nm Al2O3. The experimental results demonstrate over 90 percent absorption between 400 nm and 1640 nm wavelengths that is optimized for ultra-broadband absorption in MIMI structures. Moreover, the impedance matching method with free-space is used to shed light on the metallic layer selection process.
In this paper, we propose a facile route to fabricate a metal insulator multilayer stack to obtain ultra-broadband, wide angle behavior from the structure. The absorber, which covers near infrared (NIR) and visible (Vis) ranges, consists of a metal-insulator-metal-insulator (MIMI) multilayer where the middle metal layer has a variant thickness. It is found that this non-uniform thickness of the metal provides us with an absorption that is much broader compared to planar architecture. In the non-uniform case, each thickness is responsible for a specific wavelength range where the overall absorption is the superposition of these resonant responses and consequently a broad, perfect light absorption is attained. We first numerically examine the impact of different geometries on the overall light absorption property of the multilayer design. Afterward, we fabricate the designs and characterize them to experimentally verify our numerical findings. Characterizations show a good agreement with numerical results where the optimum absorption bandwidth for planar design is found to be 620 nm (380 nm–1000 nm) and it is significantly boosted to an amount of 1060 nm (350 nm–1410 nm) for multi-thickness case.