We report on the fabrication and characterization of integrated Mach–Zehnder interferometers in polymer foil without an interaction window. The interferometers are based on inverted rib waveguides, which allow single mode behavior even for waveguide widths larger than a few micrometers. The phase change between the two interferometer arms upon a refractive index change of the analyte that serves as the upper cladding is generated by the asymmetricity of the two interferometer arms. A difference of the waveguide width in the straight part of the interferometer leads to different effective refractive indices and thus to a change in the interference signal. We show in small scale the process chain, which is compatible with a cost-effective roll-to-roll fabrication process. For a proof of principle we apply deionized water and a glucose solution as analytes to the sensor foils and detect the transmitted intensity as a measure of the induced phase change. A detection limit of refractive index units is reached for homogeneous sensing at a total system length of 9.3 mm and a total waveguide core thickness of 3 μm.
Integrated ring resonators and Mach-Zehnder interferometers are sensing schemes utilizing the interaction of the evanescent field with liquid or gaseous substances surrounding the sensor. Using different simulation software programs, waveguide properties such as single-mode behavior and mode profile are investigated and different loss mechanisms and their impact on the sensor design are discussed