18 September 2023 in Engineering Structures
19 January 2024 in Structures
1 January 2021 in Advances in Civil Engineering
The non‐uniform stratum and uneven surface have the complicated seismic spatial variability. The seismic response of high pier and small radius curved bridge caused by the seismic specificity of this kind of terrain has not been systematically studied. According to the multi‐point excitation theory of long‐span structures and the similar theory of shaking table test in model structures, a high pier with small radius curved girder bridge was used as the research object. The shaking table test of real bridge model was carried out to study the seismic response laws of this kind of bridge under multi‐point excitation. The results show that the designed seismic wave expansion device can meet the test requirements. The frequency of the model structure decreases rapidly and the damping ratio increases during the whole test process. The local terrain effect amplifies the seismic response of high pier and small radius curved bridge. The seismic response of high pier and small radius curved bridge is affected by different frequency spectrum seismic waves, and there is a big difference. Based on the above results, the impact of multi‐point excitation should be considered in seismic design of high pier with small radius curved bridge.
8 January 2020 in KSCE Journal of Civil Engineering
To establish a simplified analysis model of the shear bearing capacity of underpinning beams and study the shear bearing mechanism of underpinning beams, two underpinning beams adopting the roughening + planting bar + building glue connection method were tested and analyzed. The experimental and numerical analysis results show that the initial slip bearing capacity and initial slip amount of the underpinning beam are small, indicating that the connection method of roughening + planting bar + building glue is effective and feasible.The failure mode and mechanical performance of the underpinning beams are similar to the bending shear failure of a cast-in-place deep beam, and the crack development rule and failure mode of the specimen are in good agreement with the mechanical characteristics of the truss-arch model. Moreover, the theoretical and numerical results show that by increasing the reinforcement ratio of the stirrups, the ultimate bearing capacity of the underpinning beam can be improved, and the slippage between the new-to-old concrete of the beam can be effectively reduced. Finally, based on the truss-arch model theory and considering the concrete arch effect and softening effect, the shear bearing capacity calculation formula of the underpinning beam is established. The results show that the truss-arch model is applicable to the bearing capacity analysis of underpinning beams and provides a new perspective for the bearing capacity calculation of similar underpinning beams.
4 March 2025 in Structures
1 January 2020 in Advances in Civil Engineering
Aiming at the phenomenon of punching failure and large slip at the new‐to‐old concrete interface of “beam‐column” underpinning joint, a new type of “all‐inclusive” underpinning joint is tested and numerically analyzed, which adopts the spraying glue + grooving + planting bars + prestressed + hooping connection method. The experimental and numerical analysis results show that the connection method of “all‐inclusive” underpinning joint can effectively avoid punching failure of the joint, and the failure mode is mainly flexure‐shear. Then, the “all‐inclusive” underpinning joint can delay the initial slip at the new‐to‐old concrete interface and reduce the overall slip. Finally, combining the theoretical and experimental results, a simplified calculation formula for the bearing capacity of the “all‐inclusive” underpinning joint is improved. The theoretical results are in good agreement with the experimental results, which indicates that the calculation of the bearing capacity of the underpinning joint using the formula in this paper is feasible and can provide experimental and theoretical references for similar projects.