1 March 2015 in Journal of Iron and Steel Research International
1 September 2014 in Journal of Iron and Steel Research International
1 January 2017 in Procedia Engineering
International audienceThe present paper focuses on the validation of ongoing efforts made to develop more advanced 3D mathematical model for cold rolling strip process [8]. Following [2], the model uses the multi-slab strategy to deal with the differential reduction in the transverse direction due to roll deformation, and analytical solutions of roll bending and flattening discretized by the Influence Function Method (IFM). Furthermore, the model has been extended to incorporate elastic deformation of strip and to be fit for 6-high rolling mills with shiftable work roll (WR) or Intermediate Rolls (IR) as well as 4-high mills. Validation is performed by using FEM solutions (Abaqus® implicit) as references: a 2D quasi-static model to check the slab method under rigid work roll condition; a 3D FEM to discuss the assumption of small lateral flow of strip; a comparison of FEM and IFM with regard to 6-high roller stack deformation with intermediate roll shifting. All these steps are essential to gain more insight into the mechanism of cold rolling strip and to guide future development work of the mathematical model. Abstract The present paper focuses on the validation of ongoing efforts made to develop more advanced 3D mathematical model for cold rolling strip process [8]. Following [2], the model uses the multi-slab strategy to deal with the differential reduction in the transverse direction due to roll deformation, and analytical solutions of roll bending and flattening discretized by the Influence Function Method (IFM). Furthermore, the model has been extended to incorporate elastic deformation of strip and to be fit for 6-high rolling mills with shiftable work roll (WR) or Intermediate Rolls (IR) as well as 4-high mills. Validation is performed by using FEM solutions (Abaqus® implicit) as references: a 2D quasi-static model to check the slab method under rigid work roll condition; a 3D FEM to discuss the assumption of small lateral flow of strip; a comparison of FEM and IFM with regard to 6-high roller stack deformation with intermediate roll shifting. All these steps are essential to gain more insight into the mechanism of cold rolling strip and to guide future development work of the mathematical model
10 August 2018 in MATEC Web of Conferences
Scanning electron microscopy (SEM) is used to observe the fracture surface morphology of Q235 steel. The cracking law/crack rule principle of strip surface under tension is studied via universal tensile testing machine. The results show that the thickness of the scale is relatively uniform, about 10 μm, and the structure is dense and well attached to the matrix. Tensile experiments show that as the strain increases, the cracks increase slowly in the initial stage, rapidly in the middle period, and slowly in the final period. When the strain exceeds 0.15%, the cracks are difficult to increase. In order to avoid direct erosion of the abrasive on the substrate, a reasonable range of tension setting should be 0.15%-0.18% in the pretreatment process without acid descaling.