20 November 2006 in IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics)
This correspondence presents a novel online trajectory-planning method for the autonomous robotic interception of moving targets in the presence of dynamic obstacles, i.e., position and velocity matching (also referred to as rendezvous). The proposed time-optimal interception method is a hybrid algorithm that augments a novel rendezvous-guidance (RG) technique with the velocity-obstacle approach, for obstacle avoidance, first reported by Fiorini and Shiller. The obstacle-avoidance algorithm itself could not be used in its original form and had to be modified to ensure that the online planned path deviates minimally from the one generated by the RG algorithm. Extensive simulation and experimental analyses, some of which are reported in this correspondence, have clearly demonstrated the tangible time efficiency of the proposed interception method
6 September 2026 in Scientific Reports
Reliable localization is required for autonomous mobile robots when individual sensing streams become noisy, intermittent, or unavailable. This study evaluates a multi-sensor fusion framework that combines LiDAR, monocular vision, GPS, UWB, and IMU data using three strategies: (i) a baseline Extended Kalman Filter (EKF); (ii) a dual-stage sequential EKF that refines LiDAR-Inertial Odometry (LIO) before the final fusion stage; and (iii) a hybrid learning-filtering approach in which modality-specific learned motion and position estimates are incorporated into an EKF. All evaluations were conducted in ROS-Gazebo under nominal operation and controlled sensor-degradation/dropout conditions. Relative to the controller-derived reference trajectory, the standard EKF achieved 0.2235 m RMSE and the dual-stage EKF achieved 0.2029 m RMSE, a descriptive reduction of approximately 9.2% for the reported run. The hybrid learning-EKF achieved 0.212 m RMSE under nominal sensing and 0.384 m RMSE during the tested failure sequence. These results support the evaluated fusion designs under the reported simulation conditions, but they do not establish statistical generalization or universal real-world resilience; independent ground truth, repeated trials, GPS ablation, and physical validation remain necessary.
12 September 2026 in SSRN Electronic Journal
Image restoration tasks such as desnowing and dehazing remain challenging due tocomplex degradations that affect both low- and high-frequency components. ExistingCNN-based methods often rely on Layer Normalization, which enforces fixed statisticaldistributions and can oversmooth fine-grained details, limiting the recovery ofcritical high-frequency information. To address this limitation, we propose a unifiedframework, termed NAFXT, which integrates Dynamic Tanh (DyT) normalization withfrequency-aware modules. Unlike conventional normalization, DyT employs learnable,data-dependent scaling that, when combined with standard convolutional operations,preserves local feature variations and avoids oversmoothing, thereby maintaining essentialhigh-frequency details. This enables the generation of detailed feature mapsthat are essential for subsequent frequency processing. Specifically, the NAFXTBlockacts as a preprocessing stage, while the Multi-Branch Dynamic Selective Frequency(MDSF) and Multi-Branch Compact Selective Frequency (MCSF) modules captureglobal frequency information. This synergistic design facilitates effective local andglobal feature extraction. Experimental results demonstrate that the proposed methodachieves superior performance on both desnowing and dehazing benchmarks, reachingup to 41.25 dB PSNR while training time converges faster than Layer Normalization basedcounterparts. However, the framework has not yet been validated on a broaderrange of restoration tasks, which we leave for future work.