With the growth of the manufacturing industry, the demand for alloy materials with high hardness, toughness, and impact strength has increased. Since products from such alloy materials are extremely difficult to manufacture with high accuracy and reduced surface roughness using traditional machining techniques, wire electric discharge machining can be used to machine such complex parts with more precision. In this case-study-based research, machining factors such as current, pulse-on time, and voltage are studied to determine their effects on the material removal rate for AISI 1045 medium carbon steel. The Taguchi L9 orthogonal array is used in the design of experiments for optimization. Statistical techniques such as analysis of variance and signal-to-noise ratio are used to identify the control parameters that matter most in bringing about optimal results. Based on the results, the current is the most crucial control variable in this investigation. Moreover, the maximum material removal rate obtained was 0.7112 mm3/min with the obtained optimized values of current (I) = 16 A, voltage (V) = 50 V, and pulse-on time (Ton) = 100 µs.
High capacitance devices (Supercapacitors) fabricated using two-dimensional materials such as Graphene and its composites are attracting great attention of the research community, recently. Synthesis of 2D materials and their composites with high quality is desirable for the fabrication of 2D materials-based supercapacitors. Ultrasonic Assisted Liquid Phase Exfoliation (UALPE) is one of the widely used techniques for the synthesis of graphene. In this article, we report the effect of variation in sonication time on the exfoliation of graphite powder to extract a sample with optimal properties well suited for supercapacitors applications. Three different graphite powders (hereafter termed as sample A, sample B, and sample C) were sonicated for duration of 24 h, 48 h and 72 h at 60 °C. The exfoliation of graphite powder into graphene, GO and GrO was studied using XRD and RAMAN. AFM and SEM were further used to examine the layered structure of the synthesized nanocomposite. UV–visible spectroscopy and cyclic voltammetery were used to measure the band gaps, and capacitive behavior of the samples. Sample B exhibited a remarkable specific capacitance of 534.53 F/g with charge specific capacity of 530.1 C/g at 1 A/g and energy density of 66 kW/kg. Power density varied 0.75 kWh/kg to 7.5 kWh/kg for a variation in current density from 1 to 10 A/g. Sample B showed capacitive retention of 94%, the lowest impedance and highest degree of exfoliation and conductivity as compared to the other two samples.
Applications of mobile robots are continuously capturing the importance in numerous areas such as agriculture, surveillance, defense, and planetary exploration to name a few. Accurate navigation of a mobile robot is highly significant for its uninterrupted operation. Simultaneous localization and mapping (SLAM) is one of the widely used techniques in mobile robots for localization and navigation. SLAM consists of front- and back-end processes, wherein the front-end includes SLAM sensors. These sensors play a significant role in acquiring accurate environmental information for further processing and mapping. Therefore, understanding the operational limits of the available SLAM sensors and data collection techniques from a single sensor or multisensors is noteworthy. In this article, a detailed literature review of widely used SLAM sensors such as acoustic sensor, RADAR, camera, Light Detection and Ranging (LiDAR), and RGB-D is provided. The performance of SLAM sensors is compared using an analytical hierarchy process (AHP) based on various key indicators such as accuracy, range, cost, working environment, and computational cost.
The understanding of the growth and morphological evolution of nanoclusters with process parameters such as ion source geometry, voltage, current, time, and gas pressure are highly important to achieve their desired sizes, morphology, and concentration. Carbon nanoclusters (0-dimensional) were synthesized using the DC glow discharge technique at different process parameters (such as Ne-gas pressures, current, voltage, etc.) using custom fabricated graphite ion sources of cylindrical and U-shaped geometries. The morphology and density of carbon nanoclusters were studied with an atomic force microscope (AFM) to understand their evolution at different process parameters. The study suggests that the U-shaped hollow cathode ion source produces tiny carbon nanoclusters at greater concentration as compared to the cylindrical cathode. Similarly, the density of tiny nanoclusters enhances greatly with the increasing pressures (e.g., 75 mbar). In addition, the AFM morphology of the nanoclusters shows that they are more agglomerated at relatively lower pressure (e.g., 25 mbar). This may be due to the higher fragmentation of carbon soot with the increasing pressure because of more collisions among gas molecules and carbonaceous species. At controlled and optimized Ne-gas pressures and source geometry, carbon nanoclusters of the desired sizes can be fabricated, which may become promising candidates for nanoscale electronics, optoelectronic, and spintronic devices.
Reliable localization is required for autonomous mobile robots when individual sensing streams become noisy, intermittent, or unavailable. This study evaluates a multi-sensor fusion framework that combines LiDAR, monocular vision, GPS, UWB, and IMU data using three strategies: (i) a baseline Extended Kalman Filter (EKF); (ii) a dual-stage sequential EKF that refines LiDAR-Inertial Odometry (LIO) before the final fusion stage; and (iii) a hybrid learning-filtering approach in which modality-specific learned motion and position estimates are incorporated into an EKF. All evaluations were conducted in ROS-Gazebo under nominal operation and controlled sensor-degradation/dropout conditions. Relative to the controller-derived reference trajectory, the standard EKF achieved 0.2235 m RMSE and the dual-stage EKF achieved 0.2029 m RMSE, a descriptive reduction of approximately 9.2% for the reported run. The hybrid learning-EKF achieved 0.212 m RMSE under nominal sensing and 0.384 m RMSE during the tested failure sequence. These results support the evaluated fusion designs under the reported simulation conditions, but they do not establish statistical generalization or universal real-world resilience; independent ground truth, repeated trials, GPS ablation, and physical validation remain necessary.