Ahmed Al-Timimy

Ahmed Al-Timimy

Auto-generated profile, based on publicly available information

Ahmed Al-Timimy

Power Electronics, Machines and Control Group, The University of Nottingham, University Park, Nottingham, NG7 2RD, UK

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 March 2018 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
AAAhmed Al-Timimy
Ahmed Al-Timimy
PGPaolo Giangrande
Paolo Giangrande
MDMichele Degano
Michele Degano
ZXZeyuan Xu
Zeyuan Xu
Michael GaleaMichael Galea
Michael Galea
LXLiqun Xia
Liqun Xia
This paper describes the design process of a 10 kW 19 000 r/min high power density surface mounted permanent magnet synchronous machine for a directly coupled pump application. In order to meet the required specifications, a compact machine with cooling channels inside the slots and flooded airgap has been designed through finite element (FE) optimization. For high power density, high-speed machines, an accurate evaluation of the power losses, and the electromechanical performance is always extremely challenging. In this case, the completely flooded application adds to the general complexity. Therefore, this paper deals with a detailed losses analysis (copper, core, eddy current, and mechanical losses) considering several operating conditions. The experimental measurements of ac copper losses, as well as the material properties (BH curve and specific core losses) including the manufacturing process effect on the stator core, are presented. Accurate 3-D FE models and computational fluid dynamics analysis have been used to determine the eddy current losses in the rotor and windage losses, respectively. Based on these detailed analysis, the no-load and full-load performance are evaluated. The experimental results on the manufactured prototype are finally presented to validate the machine design.

25 March 2019 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
PGPaolo Giangrande
Paolo Giangrande
AGAlessandro Galassini
Alessandro Galassini
SPSavvas Papadopoulos
Savvas Papadopoulos
AAAhmed Al-Timimy
Ahmed Al-Timimy
GCGiovanni Lo Calzo
Giovanni Lo Calzo
CGChristopher Gerada
Christopher Gerada
The more electric aircraft concept aims to improve the fuel consumption, the weight and both the maintenance and operating costs of the aircraft, by promoting the use of electric power in actuation systems. According to this scenario, electromechanical actuators for flight control systems represent an important technology in next generation aircraft. The paper presents a linear geared electromechanical actuator for secondary flight control systems, where the safety and availability requirements are fulfilled by replicating the electric drive acting on the drivetrain. Indeed, the architecture considered consists of two power converters feeding as many electrical machines coupled to the same mechanical system. The design of both the permanent magnet synchronous machine and the power converter are addressed. Preliminary results on the electric drive prototype are also provided and compared to the design requirements. Finally, the electromechanical actuator performance at system-level is evaluated in Dymola environment, analyzing different operating modes.

19 February 2018 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
AAAhmed Al-Timimy
Ahmed Al-Timimy
GVGaurang Vakil
Gaurang Vakil
MDMichele Degano
Michele Degano
PGPaolo Giangrande
Paolo Giangrande
CGChristopher Gerada
Christopher Gerada
Michael GaleaMichael Galea
Michael Galea
An often-overlooked aspect during the development process of electrical machines is the validity and accuracy of the machine material properties being used at the design stage. Designers usually consider the data provided by the material supplier, which are measured on material in an unprocessed state. However, the fact that the machining processes required to produce the finished product (e.g., the stator core) can permanently vary the material properties is very often neglected. This paper, therefore, deals with and investigates the effects that such processes can have on the overall machine performance. To do this, three sets of material data, the material suppliers’ data, material data based on conventional characterization methods, and material data based on test samples that include the manufacturing processes, are used to develop three versions of the same baseline machine. The results of these three machines are then compared, and the resulting variations of the machine's performance are presented and described. The chosen baseline machine is a high-performance and relatively high speed, aerospace, electrical machine. Special attention is focused on the efficiency maps of the machine, as this aspect is highly dependent on the material properties that are the most sensitive to manufacturing processes such as the material's anhysteretic B–H curve and its specific core loss.

1 September 2018
Verified
Conference Paper
Closed access
AAAhmed Al-Timimy
Ahmed Al-Timimy
PGPaolo Giangrande
Paolo Giangrande
MDMichele Degano
Michele Degano
MGMichael Galea
Michael Galea
CGChris Gerada
Chris Gerada
This paper presents a detailed investigation of AC copper losses in high-speed high-power density permanent magnet synchronous machine. For parallel strands winding, it is not easy to accurately estimate the AC copper losses using finite element model (FEM), due to the random distribution of the conductors inside the slots. Therefore, this work is focused on the separation of the AC copper losses component from the total measured losses. In order to obtain more precise results, the effect of manufacturing process on the stator core has also been considered. A 3D FEM has been used to evaluate the total power losses including the effect of the end-windings. Finally, the influence of the temperature on the AC losses is taken into account by monitoring the winding temperature during the experiments.

1 April 2017
Verified
Conference Paper
Closed access
AAA. Al-Timimy
A. Al-Timimy
PGPaolo Giangrande
Paolo Giangrande
MDM. Degano
M. Degano
Michael GaleaMichael Galea
Michael Galea
CGChristopher Gerada
Christopher Gerada
This paper investigates the capability of both permanent magnet synchronous machine (PMSM) and permanent magnet flux switching (PMFS) machine to provide high torque to inertia ratio for applications with demanding response in terms of acceleration and fast dynamic. The PMSM has higher torque density and efficiency among different electrical machines. However, the presence of the permanent magnets can increase the rotor inertia. Thanks to its passive salient-pole rotor, PMFS machine is a suitable solution for those applications requiring lower inertia. This paper provides a comparative analysis between the PMSM and PMFS machines considering the torque to inertia ratio, the challenges of a flooded air gap and dimensional constraints. The electromagnetic performances of both machines have been evaluated by means of finite element method and a detailed sensitivity analysis is carried out for stator and rotor geometry.

1 September 2016
Verified
Conference Paper
Closed access
AAA. Al-Timimy
A. Al-Timimy
MDM. Degano
M. Degano
PGPaolo Giangrande
Paolo Giangrande
GCG. Lo Calzo
G. Lo Calzo
ZXZ. Xu
Z. Xu
LXL. Xia
L. Xia
This paper presents the design optimization procedure of a high power-density, permanent magnet synchronous machine for industrial pump applications. The designed machine drives an electric, oil flooded pump. In order to achieve higher torque-density, a fractional slot machine (8 poles, 9 slots) with double layer (concentrated) winding has been selected after a preliminary trade-off study, which considered several slot/pole combinations and winding configurations. The developed machine provides low torque ripple and short end windings, which contribute to lower axial length and higher efficiency. The electromagnetic performances have been evaluated by using finite element method and the lamination geometry has been optimized through a genetic. The final results are presented highlighting the achieved design targets.