An effective biaxial tension and compression test method is proposed based on the shortcomings of current research for the mechanical properties of solid propellants under complex stress states. The equal proportion biaxial tension and compression test of HTPB (Hydroxyl-terminated polybutadiene) and NEPE (NitrateEster Plasticized Polyether) solid propellants is performed at different rates while at room temperature, and the damage morphology of the tension–compression zone is analyzed using micro-CT. The results show that the failure mode of the solid propellant under biaxial tension and compression loading is similar to that under uniaxial tension. Meanwhile, the compressive strength is much greater than the tensile strength, which will eventually cause tensile failure. With an increased loading rate, the growth trend of the initial modulus, ultimate strength, and maximum elongation of the propellant is gradually flattened, and the damage degree is gradually reduced. Additionally, damage that forms in the HTPB propellant is from dewetting and particle fracture while that for the NEPE propellant is from matrix tearing. The porosity can be used as the meso-damage parameter of the propellant.
Neutral polymer bonding agents (NPBAs) significantly enhance the mechanical properties of nitrate ester plasticized polyether (NEPE) propellants by regulating the interfacial characteristics between ammonium nitrate filler and the binder matrix. However, under external loading, the mechanisms by which NPBAs influence the mesostructural evolution and macroscopic mechanical behavior of NEPE propellants remain to be further clarified. In this study, in-situ scanning electron microscopy (in-situ SEM), atomic force microscopy (AFM), and uniaxial tensile tests were combined to investigate the effects of NPBAs on meso-damage evolution and macroscopic mechanical properties of NEPE propellants. The results show that the introduction of NPBAs enhances the interfacial bonding between ammonium nitrate filler and the matrix, thereby delaying the debonding of ammonium nitrate particles. With increasing NPBA content, the dominant meso-damage mechanism gradually shifts from ammonium nitrate particle debonding to ammonium perchlorate (AP) particle debonding, leading to changes in the damage evolution path and failure mode. Further analysis indicates that, compared with variations in NPBA content, the introduction of NPBAs has a more pronounced effect on the mechanical properties of the propellant.