This work studies the water-exit problems of slender cylinders under various conditions through experimental investigation. An experimental platform was equipped with high-speed photography. A total of 13 experimental cases with varying head shapes (conical, spherical, and truncated cone designs), length-to-diameter ratios (5:1–7:1), ejection velocities (7.24–17.93 m/s), and elastic moduli (227.36–279.14 MPa) were conducted to capture water-exit characteristics. The investigation identified ejection velocity as the predominant parameter governing cavity morphology and stability, with higher velocities correlating to increased cavity dimensions and reduced drag coefficients by 54%. Conical head shape resulted in superior drag reduction characteristics, forming a typical cigar-shaped cavity with clear and regular boundaries. Additionally, an increased length-to-diameter ratio substantially improved drag reduction performance by 33%. Material elastic moduli proved crucial for water-exit stability, as cylinders with lower moduli experienced severe bending deformation and even trajectory changes, while higher moduli cylinders maintained their form with minimal deformation. This study illuminates the physical mechanisms of slender body water-exit under multi-factor coupling conditions, providing experimental evidence and theoretical guidance for cross-media vehicle design and underwater equipment optimization.
The small scale gap test is a very important method to study the sensitivity characteristics of a composite solid propellant under shock waves. In this paper, the small scale gap test is taken as the research object. The theoretical model of shock wave conduction in the small scale gap test is established. The detonation parameters of mixed explosives and the shock wave incident parameters of propellants corresponding to different sizes of inert barriers are calculated. The reliability of the method is verified by classical examples. A numerical model is established for the small scale gap test, and the critical thickness of the partition plate is obtained with a 50% probability of initiation. The results can predict the development and safe use of a high-energy composite solid propellant and provide theoretical support for the establishment of safety standards of high-energy composite solid propellants.
26 February 2025 in Engineering Analysis with Boundary Elements