17 February 2021 in Geofluids
The analysis of energy dissipation characteristics is a basic way to elucidate the mechanism of coal rock fragmentation. In order to study the energy dissipation patterns during dynamic tensile deformation damage of coal samples, the Brazilian disc (BD) splitting test under impact conditions was conducted on burst-prone coal samples using a split Hopkinson pressure bar (SHPB) loading system. The effects of impact velocity, bedding angle, and water saturated on the total absorbed energy density, total dissipated energy density, and damage variables of coal samples were investigated. In addition, the coal samples were collected after crushing to produce debris with particle sizes of 0-0.2 mm and 0.2-5 mm, and the distribution characteristics of different size debris were compared and analyzed. The results show that the damage variables of natural dry coal samples increase approximately linearly with the increase of impact velocity; however, the overall damage variables of saturated coal samples increase exponentially as a function of impact velocity. Compared with air-dry samples, the number of fragments with the particle size of 0-0.2 mm of saturated samples decreases by 14.1%-31.3%, and the number of fragments with the particle size of 0.2-5 mm decreases by 33.7%-53.0%. However, when the bedding angle is 45°, the percentage of fragment mass of saturated samples is larger than that of air-dry samples. The conclusions provide a theoretical basis for understanding the deterioration mechanism of coal after water saturation and the implementation of water injection dust prevention technology in coal mines.
1 January 2021 in Shock and Vibration
To study the tensile and fracture properties of the specimen under the quasistatic loading, the Brazilian disc splitting method and the notched semicircular bend (NSCB) method were used to test the tensile properties of coal specimens, and the fracture properties of NSCB specimens with different notch depths were tested and analyzed. The applicability of plane strain fracture toughness KIC and J‐integral fracture toughness in evaluating the fracture properties of coal specimens was discussed. The influence of notch depth on the fracture toughness measurement of the NSCB specimen was studied. Combined with the surface strain monitoring of specimens during loading and the industrial CT scanning image of damaged specimens, the deformation characteristics of coal specimen under loads and the distribution law of crack after failure were analyzed. The results show that the NSCB test is suitable for measuring the tensile strength of a coal specimen; when the dimensionless notch depth is β = 0.28, the dispersion of plane strain fracture toughness KIC of the NSCB specimen is the smallest. Besides, the plane strain fracture toughness of coal is obviously affected by the notch depth and dimensionless stress intensity factor. The J‐integral fracture toughness can be used to effectively evaluate the fracture performance of specimens.
7 April 2022 in Advances in Materials Science and Engineering
The coal mining process is often accompanied by periodic disturbance of the surrounding rock mass around the coal mining face. Therefore, it is of great theoretical and engineering value to investigate the damage pattern of bituminous coal under cyclic loading and unloading conditions and analyze its damage precursors. The experiments of uniaxial multistage cyclic loading and unloading of bituminous coal were carried out, and the loading and unloading response ratios were extracted using the elastic modulus variation to describe the damage characteristics and damage precursors of bituminous coal. Based on the accumulated acoustic emission ringing counts, the response ratios were defined, and the internal damage evolution characteristics and damage laws during the damage of bituminous coal were analyzed. The CT scan images of the internal structure of the coal sample before and after the experiment were used to analyze the damage characteristics of the coal sample and the influence of the number of simulation units on the results using the inverse modeling simulation analysis method. The research shows that the response ratio of bituminous coal under uniaxial cyclic loading has three stages of variation, and it is characterized by periodic “W”-type variation at each level of stress. In addition, the inverse modeling and simulation can better characterize the damage evolution of the coal specimen.