6 July 2020 in Applied Physics Letters
Gallium oxide has been attracting much interest due to its tremendous potential for power device application. The (BxGa1−x)2O3 ternary alloys of monoclinic and orthorhombic phases with the B-content covering the full composition were studied using first-principles density functional theory calculations. The effect of the B-content on the structural and electronic properties of (BxGa1−x)2O3 alloys is discussed. The formation enthalpy of the ternary alloys has been investigated, indicating the feasibility of synthesizing (BxGa1−x)2O3 alloys depending on the specified growth temperature condition. In addition, the increase in the B-content in (BxGa1−x)2O3 alloys generally leads to the decrease in lattice constants, implying possible tensile strain if grown on the Ga2O3 substrate. Our analysis on the electronic properties shows that all (BxGa1−x)2O3 alloys exhibit indirect gap property, in which the bandgap increases from 4.83 eV to 6.86 eV in the monoclinic phase and from 5.32 eV to 11.27 eV in the orthorhombic phase when the B-content increases from 0% to 100%. The band alignment between Ga2O3 and B2O3 in the (100)-direction is also presented, showing a type-II and type-I alignment for monoclinic-based and orthorhombic-based alloys, respectively. Our results showed an extremely large conduction band offset of 5.76 eV between orthorhombic-based Ga2O3 and B2O3 alloys. Our studies regarding the electronic and structural properties provide important insight regarding the potential of (BxGa1−x)2O3 alloys for III-oxide-based electronic and optoelectronic device applications.
1 December 2019 in AIP Advances
First-principles density functional theory is applied to investigate the electronic and structural properties of dilute-Se β-Ga2(O1−xSex)3 alloys with the Se-content ranging from 0% to 16.67%. The findings showed that the addition of Se has significant effect on the β-Ga2O3 alloy properties. The equilibrium volume and lattice parameters of β-Ga2(O1−xSex)3 alloys are presented, showing a general expansion with increasing Se-content. Further analysis indicates the expansion rate in the c (001) direction is much larger than that in the a and b directions, in which the information provides important guidance for the manufacturing of the β-Ga2(O1−xSex)3/Ga2O3-based material. From our analysis of the band structures, the β-Ga2(O1−xSex)3 alloys exhibit indirect bandgap property with the bandgap energy decreasing dramatically from 4.868 eV to 2.759 eV. The wavelength derived from the direct bandgap energy covers a regime from 255 nm to 475 nm, implying the potential of β-Ga2(O1−xSex)3 alloys in an ultraviolet photodetector and visible light applications. In addition, electron effective masses are calculated and presented for the β-Ga2(O1−xSex)3 alloys, in which the electron effective mass reduces as the Se-content increases. As a part of a highly mismatched alloy semiconductor class, dilute-Se Ga2(O1−xSex)3 is discussed for the first time with no prior literature in our work, and our findings indicate the potential implementation of GaOSe alloys for electronic and optoelectronic device applications.
17 May 2021 in Journal of Materials Chemistry C
Our work shows a remarkable bandgap tuning range of 7.46 eV with AlOSe alloys, a type of III-oxychalcogenide class. Further analysis revealed large band offsets in conduction and valence bands, implying type-I band alignment in AlOSe/Al 2 O 3 systems.
1 February 2020 in AIP Advances
Effective filtration of orbital angular momentum (OAM) modes is essential to achieve multiple-channel data transmission in an OAM fiber for telecommunication applications. The nature of helical-shaped OAM wave propagation possessing many topological charges implies the need for uniquely designed index-modulated filters to conform to its twisted propagating direction in the fiber. Here, different from previous structures in demultiplexing OAM modes, a helical-shaped fiber grating structure concept is proposed as a pathway toward efficient demultiplexing of OAM modes in a fiber. A comparison of our proposed structure with the conventional fiber Bragg filter in transmitting an OAM wave shows a stronger reflection of the higher order OAM mode. We suggest that the proposed fiber Bragg structure has strong potential to be used for OAM fiber telecommunication technology.