Nowadays, TLS (terrestrial laser scanning) has been a relatively mature measuring equipment categorized to indoor measuring robots, but it is not widely adopted in indoor construction measurement at present. What accounts for its limited application are as follows: (1) the high cost of high‐accuracy laser LIDAR and (2) existing TLS equipment does not possess self‐adaptation scanning planning and takes no account of efficiency of point cloud processing and consumption of computing power. This paper proposes a novel TLS equipment and a high‐efficiency point cloud processing method customized for the novel equipment, with purpose to achieve self‐adaption measurement on the basis of indoor characteristics of construction during civil engineering at low cost. This paper mainly presents two parts of innovations: (1) for planning of scanning, the novel TLS features planning sampling density of scanning according to room size and converting scanning data from poses to point clouds, and (2) for processing of point clouds, this paper proposes two novel segmentation algorithms, namely, “on‐boundary segmentation algorithm” and “on‐angular‐distance segmentation algorithm,” based on indoor spatial structure features and characteristics of TLS. Besides, this paper presents modified RANSAC‐TLS (random sample consensus‐total least squares) plane fitting algorithm, on basis of TLS point cloud distribution characteristics and spatial transformation. Through actual measurement test, it is concluded that the “on‐boundary segmentation algorithm” and “on‐angular‐distance segmentation algorithm” are suitable for point cloud segmentation in different types of scenes. The modified RANSAC‐TLS have made a great improvement on accuracy of fitting versus LS (least squares), TLS (total least squares), and RANSAC‐LS. Finally, this paper conducts an experiment by executing an actual measurement and then preliminarily testifies the potential and future application of the proposed novel TLS (terrestrial laser scanning) equipment, with measurement parameters from it being changed in the experiment, by comparing with one existing TLS equipment—FARO. The test thus proves the relatively high feasibility and potential of the novel TLS presented in the paper (terrestrial laser scanning) in actual indoor measurement.
In recent years, accelerative aging society is meeting the short supply of young and middle‐aged labor. Particularly, most young people are reluctant to work in the construction industry, which has caused the labor cost of floor tiling to rise year by year. In addition, floor tiling requires workers to continuously bend over or lean over to work, which greatly jeopardizes the physical health of them. Therefore, advanced technology applied in floor tiling is highly demanded to replace the traditional manual method. On the context, the automatic method of floor tiling may promote the transformation and upgrading of the industry. Although a few robots for floor tiling have been developed, the automation of existing systems is still at a low level. This paper proposes a robot floor‐tiling control strategy based on visual measurement feedback and finite‐state machine, in which the calculation of tile position information in limited field of vision is obtained by an improved Canny edge detection and a Hough linear transformation. Moreover, an algorithm for complementing tile position information based on visual measurement is proposed, and the quality of tile laying is evaluated online. To evaluate the effect of the proposed control strategy, the experimental verifications are given. The experimental results indicate that the proposed method can complete the automatic floor tiling with high accuracy.