We have developed a novel semiairborne frequency-domain electromagnetic (EM) system and successfully tested it within the DESMEX project. The semiairborne approach relies on the fact that part of the system is positioned on the ground and the rest is airborne. This allows us to take advantage of ground and airborne techniques. In particular, a high-moment transmitter can be installed on the earth’s surface, which enables us to inject and induce strong EM fields in the subsurface. Moreover, galvanic coupling is possible, which is an advantage if additional ground stations are deployed. The airborne receivers allow easier, significantly faster, and more uniform spatial coverage of the study area than the ground receivers. In our implementation, transmitters and electric field receivers are installed on the ground. Magnetic field sensors, such as commercially available fluxgate, total field magnetometers, and newly developed induction coils, are installed on a helicopter-towed bird. First, we describe the results of a semiairborne survey performed in a selected area with ancient mining located in the Saxothuringian zone near Schleiz, Germany. A 3D semiairborne inversion model represents several conductive anomalies, which agree well with the outcrop of alum shale formations at the surface. In addition, the shallow parts of the semiairborne model are compared with the result of an independent helicopter-borne survey, which consists of stepwise 1D models.
In the framework of the Deep Electromagnetic Soundings for Mineral Exploration project, we conducted ground‐based long‐offset transient‐electromagnetic measurements in a former mining area in eastern Thuringia, Germany. The large‐scale survey resulted in an extensive dataset acquired with multiple high‐power transmitters and a high number of electric and magnetic field receivers. The recorded data exhibit a high data quality over several decades of time and orders of magnitude. Although the obtained subsurface models indicate a strong multi‐dimensional subsurface with variations in resistivity over three orders of magnitude, the electrical field step‐on transients are well fitted using a conventional one‐dimensional inversion. Due to superimposed induced polarization effects, the transient step‐off data are not interpretable with conventional electromagnetic inversion. For further interpretation in one and two dimensions, a new approach to evaluate the long‐offset transient‐electromagnetic data in frequency domain is realized. We present a detailed workflow for data processing in both domains and give an overview of technical obstructions that can occur in one domain or the other. The derived one‐dimensional inversion models of frequency‐domain data show strong multi‐dimensional effects and are well comparable with the conventional time domain inversion results. To adequately interpret the data, a 2.5D frequency‐domain inversion using the open source algorithm MARE2DEM (Modeling with Adaptively Refined Elements for 2‐D EM) is carried out. The inversion leads to a consistent subsurface model with shallow and deep conductive structures, which are confirmed by geology and additional geophysical surveys.
The transition toward renewable energies demands a secure supply of critical raw materials and requires efficient noninvasive methods for deep earth resource exploration. The novel, deep electromagnetic (EM) sounding for the mineral exploration semi-airborne EM (semi-AEM) exploration concept aims at the efficient exploration of resources down to a depth of 1 km. Here, we evaluate a large-scale semi-AEM exploration study in a graphite mining district in eastern Bavaria, Germany. The derived 3D semi-AEM model is based on approximately 70,000 complex-valued data points recorded using seven transmitters. Strong conductivity contrasts with dominant east–west-trending anomalies are visible. Shallow high-conductivity structures correlate well with the known occurrence of graphite and match existing helicopter-borne EM results. The main anomaly reaches down to several hundred meters depth. To investigate different interpretation scenarios for large-scale semi-AEM data, we determine the effect of topography and analyze the feasibility of fast 2D inversion applications. To validate the robustness of the 3D semi-AEM model, the data set is inverted with two different 3D inversion algorithms and the results are compared. The presence of graphite leads to significant induced polarization (IP) effects with considerably high chargeabilities superposing EM induction. We include these effects in a realistic 3D inversion using a synthetic data study to analyze if the IP effect alters the overall conductivity structure and demonstrate that the obtained 3D model is reliable.
The shift toward renewable energy sources necessitates a stable supply of essential raw materials and calls for advanced, noninvasive techniques to explore deep-seated mineral resources. In the past few years, the semi-airborne electromagnetic (SAEM) method has been further developed to efficiently investigate the subsurface down to 1 km depth. The Kropfmühl graphite deposit in Lower Bavaria comprises high-grade metamorphic graphite-bearing gneisses. Although mining reaches depths of 200 m, the western extent of the deposit remains unknown. To verify the western extension and continuity of the Kropfmühl graphite deposit, a drone-based SAEM survey was conducted, combining a dense spatial sampling of magnetic fields using a UAV (Unmanned Aerial Vehicle) system and a high signal strength with controlled-source electromagnetic transmitters on the ground. The survey area spanned approximately 1.8 × 2.5 km2, using four galvanically coupled dipole transmitters and multiple UAV flights over 4 days. To increase depth sensitivity, a total-field magnetometer alongside a three-component induction coil system was used. To derive a reliable subsurface conductivity model, a 3D inversion of multifrequency, multisource SAEM data from vector and scalar magnetic field data was conducted. The obtained model revealed three east–west trending conductive anomalies, interpreted as graphite-rich zones. The main anomaly (C1), 200 m south of the active mine, indicates possible fault-controlled displacement. Borehole resistivity logs and available helicopter-borne electromagnetic data correlate well with conductive zones and graphite enrichment. The results highlight the potential of UAV-based SAEM to image complex subsurface structures. The method delivers high-resolution, cost-effective data acquisition, with a high data coverage and only the transmitters requiring ground installation. This renders the method suitable for imaging geologically complex settings in hard-to-access areas.
14 October 2024 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
Different electromagnetic (EM) techniques have distinct resolutions for the exploration of natural resources. Integrating independent information from different EM datasets in a joint inversion results in a more precise and reliable resistivity model. To conduct an efficient joint inversion, it is crucial to understand the resolution characteristics of each EM technique and configuration. To enhance the interpretation using 1-D joint inversion of multiple EM datasets in a former mining area in eastern Thuringia (Germany), we developed a novel workflow for systematic resolution studies. Rather than focusing on limited resistivity models, our approach provides a broader perspective on the resolution characteristics of specific EM methods. The workflow is applied to helicopter-borne EM (HEM), semi-airborne EM (Semi-AEM), and long-offset transient EM datasets. Resolution studies reveal not only the advantages and limitations of each method but also demonstrate scenarios where joint inversion benefits. These insights are useful to optimally design multimethod applications. A synthetic 1-D joint inversion example successfully reconstructs the true model, while each individual method fails. This example demonstrates the added value of our presented resolution study workflow with respect to experimental design and acquiring optimal data in terms of resolution capabilities. We provide a toolkit for resolution analysis that serves as a roadmap for multimethod studies. Subsequently, we demonstrate that the accurate determination of shallow layers improves the resolution for deep targets. This is significant for designing deep exploration prospects. In the last step, our novel triple-method joint inversion scheme is validated through the application of field data.