2 November 2018 in Science Advances
We developed a stretchable organic optoelectronic sensorimotor synapse to mimic a biological optical sensory nervous system.
12 June 2015 in Nature Communications
Elemental sulfur is one of the most attractive cathode active materials in lithium batteries because of its high theoretical specific capacity. Despite the positive aspect, lithium–sulfur batteries have suffered from severe capacity fading and limited rate capability. Here we report facile large-scale synthesis of a class of organosulfur compounds that could open a new chapter in designing cathode materials to advance lithium–sulfur battery technologies. Porous trithiocyanuric acid crystals are synthesized for use as a soft template, where the ring-opening polymerization of elemental sulfur takes place along the thiol surfaces to create three-dimensionally interconnected sulfur-rich phases. Our lithium–sulfur cells display discharge capacity of 945 mAh g−1 after 100 cycles at 0.2 C with high-capacity retention of 92%, as well as lifetimes of 450 cycles. Particularly, the organized amine groups in the crystals increase Li+-ion transfer rate, affording a rate performance of 1210, mAh g−1 at 0.1 C and 730 mAh g−1 at 5 C.
30 July 2013 in Nature Communications
Electroactive actuators have received enormous interest for a variety of biomimetic technologies ranging from robotics and microsensors to artificial muscles. Major challenges towards practically viable actuators are the achievement of large electromechanical deformation, fast switching response, low operating voltage and durable operation. Here we report a new electroactive actuator composed of self-assembled sulphonated block copolymers and ionic liquids. The new actuator demonstrated improvements in actuation properties over other polymer actuators reported earlier, large generated strain (up to 4%) without any signs of back relaxation. In particular, the millimetre-scale displacements obtained for the actuators, with rapid response (<1 s) at sub-1-V conditions over 13,500 cycles in air, have not been previously reported in the literature. The key to success stems from the evolution of the unique hexagonal structure of the polymer layer with domain size gradients beneath the cathode during actuation, which promotes the bending motion of the actuators.
18 November 2016 in Nature Communications
The key challenges in the advancement of actuator technologies related to artificial muscles include fast-response time, low operation voltages and durability. Although several researchers have tackled these challenges over the last few decades, no breakthrough has been made. Here we describe a platform for the development of soft actuators that moves a few millimetres under 1 V in air, with a superfast response time of tens of milliseconds. An essential component of this actuator is the single-ion-conducting polymers that contain well-defined ionic domains through the introduction of zwitterions; this achieved an exceptionally high dielectric constant of 76 and a 300-fold enhancement in ionic conductivity. Moreover, the actuator demonstrated long-term durability, with negligible changes in the actuator stroke over 20,000 cycles in air. Owing to its low-power consumption (only 4 mW), we believe that this actuator could pave the way for cutting-edge biomimetic technologies in the future.
25 February 2013 in Journal of Applied Polymer Science
The global energy crisis and an increase in environmental pollution in the recent years have drawn the attention of the scientific community towards the development of efficient electrochemical devices. Polymers containing charged species have the potential to serve as electrolytes in next‐generation devices and achieving high ion transport properties in these electrolytes is the key to improving their efficiency. In this article, we explore ways to improve the ion transport properties of solid polymer electrolytes by focusing on the use of ionic liquids (ILs). The application of IL‐incorporated polymer electrolytes in lithium batteries, high temperature fuel cells, and electro‐active actuators is summarized. For each system, the current level of understanding of the diverse factors affecting the transport properties of polymer electrolytes integrated with ILs is presented, in addition to the challenges encountered and strategies toward obtaining significantly improved device performances. The creation of self‐assembled morphologies in IL‐containing polymer electrolytes by the use of block copolymers is particularly highlighted as a novel prospective technique geared towards obtaining next‐generation electrochemical devices with enhanced performances. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
27 March 2018 in Chemical Communications
A key strategy for achieving high-performance polymer actuators that can be operated with a small battery is the design of polymer electrolytes.