15 April 2020 in IEEE Access
Advances in power electronics, increasing share of renewables in the energy system and e-mobility cause an increase of disturbances in the frequency range 2-150 kHz, also known as supraharmonics. A rigorous, credible and agreed measurement framework is essential to evaluate electromagnetic compatibility (EMC) in this frequency range. While a normative method exists for measuring equipment emission in the laboratory, no normative method exists yet for the measurement of supraharmonic disturbance levels in the grid. The aim of this research is a detailed comparison of potential measurement methods derived from existing standards IEC 61000-4-7, IEC 61000-4-30, CISPR 16-1-1 and a critical assessment of their suitability for disturbance measurements in grid applications. Based on a comprehensive set of synthetic signals and real measurements from laboratory and field, this article studies the ability of the methods to assess the typical characteristics of supraharmonic emission with relevance to EMC coordination. It presents the benefits and drawbacks of the existing measurement methods and discusses the suitability of possible modifications for grid compliance assessment. The results and recommendations intend to be an input for the present activities of IEC SC 77A WG 9 to define a normative method for the measurement of supraharmonic disturbance levels to be included in the next edition of IEC 61000-4-30.
19 November 2020 in IEEE Transactions on Instrumentation and Measurement
This paper presents a comparison of measurement methods for current and voltage distortion in low voltage networks in the frequency range from 2 kHz to 150 kHz (supraharmonics). The comparison encompasses the methods informatively described in IEC and CISPR international standards, as well as other innovative techniques presented in the literature. The presented work is carried out within a novel framework that includes advanced and complex synthetic test signals, as well as real grid recordings, that allow an accurate comparison of the performance of the tested methods. Specifically designed indices are employed to characterize the accuracy of the tested methods in the frequency and amplitude assessment. In light of that, strengths and weaknesses of the methods are identified. The results of this paper contribute to the ongoing standardization work carried out by the IEC SC77A/WG9 with the purpose of defining a normative measurement method suitable for assessing grid disturbance levels in the range from 2 kHz to 150 kHz.
19 March 2020 in IEEE Transactions on Instrumentation and Measurement
This paper introduces a new method for the simultaneous measurement of harmonic and supraharmonic distortion with improved robustness against amplitude and power frequency deviations. The proposed algorithm is based on wavelet analysis and it is designed to analyze a detect-all=true10 cycles measurement interval, something crucial when implementing methods to measure harmonic and supraharmonic content according to the IEC 61000-4-7 standard. Discrete Fourier Transform (DFT)-based methods, instead, must analyze a fixed detect-all=true200 interval in order to avoid apparent shifts of the supraharmonic frequency components. The results of the experimental measurements presented in the paper show that the DFT-based methodology suggested in the IEC 61000-4-7 standard produces results affected by the value of the power frequency and amplitude while the proposed method, instead, is insensitive to them. This feature also removes the need of a previous high pass filtering stage, required for the IEC method. Moreover, the proposed method has the additional advantage of working on the same measurement interval to calculate both harmonics and supraharmonics, which reduces the complexity of data handling by avoiding multithreaded Data Acquisition (DAQ) operations.
10 August 2022 in IEEE Transactions on Instrumentation and Measurement
This study proposes a novel measurement method to assess the disturbances in the electrical grid for the CISPR Band A (9–150 kHz), as no normative grid measurement method for these frequencies exists yet. Compatibility levels (CL) in IEC 61000-2-2 in this frequency range are defined based on the CISPR 16-1-1 method using the quasi-peak (QP) detector. However, this method is not directly applicable for grid measurements as it was originally designed for laboratory conditions and for measuring radio disturbances and immunity. The method proposed in this article (Light-QP method) overcomes these limitations, along with lower complexity, computational burden, and memory requirements than CISPR 16-1-1. The Light-QP method uses a digital QP detector that processes root mean square (rms) values of spectral components, calculated by adapting the IEC 61000-4-7 standard to the CISPR Band A. The proposed Light-QP method is applied to real measurements from a low-voltage (LV) distribution grid and compared to the QP outputs from a digital implementation of the CISPR 16-1-1 method. The results are comparable and can be used for assessment against CL. The Light-QP method has been presented to IEC SC77A/WG9 for its potential inclusion as a normative measurement method in a new version of the IEC 61000-4-30 standard.
30 November 2022 in Electric Power Systems Research