23 October 2025 in IEEE Access
When dealing with the compatibility issues of the coupling structure in the wireless power transfer (WPT) system for electric vehicles (EVs), there mainly exist unipolar (Q) and bipolar (DD) coils. There is no direct energy transmission between the two, which leads to the interoperability of coupling structures. During the charging process, misalignment often occurs between the transmitter (Tx) and the receiver (Rx). The interoperability and misalignment tolerance of EV WPT system need to be addressed. To solve these problems, a novel symmetrical bipolar coil structure is proposed, which can work as Tx and Rx. The proposed structure is based on the internal structure of the Q coil, through proportional division and the method of finite element design, a novel symmetrical bipolar coil structure with self-decoupling was finally obtained. An experimental prototype of 1.3-kW was established to verify the proposed. The interoperability and misalignment tolerance performance of the proposed coil at Rx were verified through calculation, simulation and experiments. Meanwhile, a corresponding dual experimental proto-type was also built, taking the proposed coil structure as Tx. At the same time, the interoperability performance and misalignment tolerance performance of the proposed coupling structure were also verified.