30 November 2014 in Nano Letters
1 November 1985 in Solid State Communications
1 October 1991 in Journal of Applied Physics
Reflectance anisotropy spectrometry is used to study the electronic properties of sulfide‐passivated GaAs. The optical technique allows measurement of the Fermi‐level displacement at the surface in situ, while the sample is immersed into a sulfide solution. The kinetics of the process was found to be very sensitive to conductivity type and doping level in GaAs.
15 February 1996 in Physical Review B
We have investigated the surface chemistry of ( S-passivated GaAs(001) by studying this surface after passivation and after several subsequent annealings. We have used ultraviolet photoemission spectroscopy (UPS) at a near-normal takeoff angle and at a takeoff angle of 70°. We have also used, in the same ultrahigh-vacuum chamber, reflectance anisotropy spectroscopy, which probes the optical transitions due to surface dimers, and therefore provides useful information for the interpretation of core-level spectra. We find that gallium dimers appear after annealing to 520 °C due to sulfur desorption. At the same stage, there appears in the corresponding 3d core-level spectrum a surface component lying at a relative binding energy of -0.32 eV with respect to the volume contribution. Arsenic dimers appear after annealing to 360 °C, following the desorption of excess arsenic. In the same way, there appears in the arsenic 3d core-level spectrum a component at a relative binding energy of -0.28 eV. After desorption of the passivating overlayer the gallium-terminated part of the surface is essentially covered with sulfur. These sulfur atoms are dimerized, and contribute to a line in the reflectance anisotropy spectrum. At this same stage, the arsenic-terminated one is covered with excess arsenic. Unlike what was believed previously from UPS analysis, As-S chemical bonds are situated only in the passivating overlayer, which contains no gallium atoms. Comparison of the core-level spectra as a function of takeoff angle shows that the progressive desorption of this overlayer produces a change of its morphology. © 1996 The American Physical Society.
20 May 2002 in Applied Physics Letters
A mild wet nitridation procedure using hydrazine-based solutions has been developed for GaAs (100) surface passivation. Both x-ray photoelectron spectroscopy and spectroscopic ellipsometry show that this nitridation procedure results in a very thin, coherent, and homogeneous GaN layer that is very stable in air. Photoluminescence data show a strong enhancement of the intensity as compared to that of an as-cleaned GaAs sample, indicating that this nitrided layer provides both chemical and electronic passivation of GaAs surfaces. The chemical mechanism of nitridation is discussed.
1 April 1989 in Surface Science