2 November 2021 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The National Aeronautics and Space Administration Soil Moisture Active Passive (SMAP) mission has been validating its soil moisture (SM) products since the start of data production on March 31, 2015. Prior to launch, the mission defined a set of criteria for core validation sites (CVS) that enable the testing of the key mission SM accuracy requirement (unbiased root-mean-square error <0.04 m 3 /m 3 ). The validation approach also includes other (“sparse network”) in situ SM measurements, satellite SM products, model-based SM products, and field experiments. Over the past six years, the SMAP SM products have been analyzed with respect to these reference data, and the analysis approaches themselves have been scrutinized in an effort to best understand the products’ performance. Validation of the most recent SMAP Level 2 and 3 SM retrieval products (R17000) shows that the L -band (1.4 GHz) radiometer-based SM record continues to meet mission requirements. The products are generally consistent with SM retrievals from the European Space Agency Soil Moisture Ocean Salinity mission, although there are differences in some regions. The high-resolution (3-km) SM retrieval product, generated by combining Copernicus Sentinel-1 data with SMAP observations, performs within expectations. Currently, however, there is limited availability of 3-km CVS data to support extensive validation at this spatial scale. The most recent (version 5) SMAP Level 4 SM data assimilation product providing surface and root-zone SM with complete spatio–temporal coverage at 9-km resolution also meets performance requirements. The SMAP SM validation program will continue throughout the mission life; future plans include expanding it to forested and high-latitude regions.
6 October 2017 in IEEE Geoscience and Remote Sensing Letters
The Soil Moisture Active Passive (SMAP) mission provides a global surface soil moisture (SM) product at 36-km resolution from its L-band radiometer. While the coarse resolution is satisfactory to many applications, there are also a lot of applications which would benefit from a higher resolution SM product. The SMAP radiometer-based SM product was downscaled to 1 km using Moderate Resolution Imaging Spectroradiometer (MODIS) data and validated against airborne data from the Passive Active L-band System instrument. The downscaling approach uses MODIS land surface temperature and normalized difference vegetation index to construct soil evaporative efficiency, which is used to downscale the SMAP SM. The algorithm was applied to one SMAP pixel during the SMAP Validation Experiment 2015 (SMAPVEX15) in a semiarid study area for validation of the approach. SMAPVEX15 offers a unique data set for testing SM downscaling algorithms. The results indicated reasonable skill (root-mean-square difference of 0.053 m³/m³ for 1-km resolution and 0.037 m³/m³ for 3-km resolution) in resolving high-resolution SM features within the coarse-scale pixel. The success benefits from the fact that the surface temperature in this region is controlled by soil evaporation, the topographical variation within the chosen pixel area is relatively moderate, and the vegetation density is relatively low over most parts of the pixel. The analysis showed that the combination of the SMAP and MODIS data under these conditions can result in a high-resolution SM product with an accuracy suitable for many applications.
21 December 2017 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The Advanced microwave scanning radiometer 2 (AMSR2) is part of the global change observationmission-water (GCOM-W). AMSR2 has filled the gap in passive microwave observations left by the loss of theAMSR-earth observing system (AMSR-E) after almost ten years of observations. Both missions provide brightness temperature observations that are used to retrieve soil moisture estimates at the near surface. A merged AMSR-E and AMSR2 data product will help build a consistent long-term dataset; however, before this can be done, it is necessary to conduct a thorough validation and assessment of the AMSR2 soil moisture products. This study focuses on the validation of the AMSR2 soil moisture products by comparison with in situ reference data from a set of core validation sites around the world. A total of three soil moisture products that rely on different algorithms were evaluated; the Japan Aerospace Exploration Agency (JAXA) soil moisture algorithm, the land parameter retrieval model (LPRM), and the single channel algorithm (SCA). JAXA, SCA, and LPRM soil moisture estimates capture the overall climatological features. The spatial features of the three products have similar overall spatial structure. The JAXA soil moisture product shows a lower dynamic range in the retrieved soil moisture with a satisfactory performance matrix when compared to in situ observations [unbiased root mean square error (ubRMSE) = 0.059 m 3 /m 3 , Bias = -0.083 m 3 /m 3 , R = 0.465]. The SCA performs well over low and moderately vegetated areas (ubRMSE = 0.053 m 3 /m 3 , Bias = -0.039 m 3 /m 3 , R = 0.549). The LPRM product has a large dynamic range compared to in situ observations with a wet bias (ubRMSE = 0.094 m 3 /m 3 , Bias = 0.091 m 3 /m 3 , R = 0.577). Some of the error is due to the difference in observation depth between the in situ sensors (5 cm) and satellite estimates (1 cm). Results indicate that overall the JAXA and SCA have the best performance based upon the metrics considered.
13 April 2017 in Water Resources Research
21 July 2020 in IEEE Transactions on Geoscience and Remote Sensing
The fourth and fifth Soil Moisture Active Passive Experiments (SMAPEx-4 and -5) were conducted at the beginning of the SMAP operational phase, May and September 2015, to: 1) evaluate the SMAP microwave observations and derived soil moisture (SM) products and 2) intercompare with the Soil Moisture and Ocean Salinity (SMOS) and Aquarius missions over the Murrumbidgee River Catchment in the southeast of Australia. Airborne radar and radiometer observations at the same microwave frequencies as SMAP were collected over SMAP footprints/grids concurrent with its overpass. In addition, intensive ground sampling of SM, vegetation water content, and surface roughness was carried out, primarily for validation of airborne SM retrieval over six ~3 km x 3 km focus areas. In this study, the SMAPEx-4 and -5 data sets were used as independent reference for extensively evaluating the brightness temperature and SM products of SMAP, and intercompared with SMOS and Aquarius under a wide range of SM and vegetation conditions. Importantly, this is the only extensive airborne field campaign that collected data while the SMAP radar was still operational. The SMAP radar, radiometer, and derived SM showed a high agreement with the SMAPEx-4 and -5 data set, with a root-mean-squared error (RMSE) of ~3 K for radiometer brightness temperature, and an RMSE of ~0.05 m³/m³ for the radiometer-only SM product. The SMAP radar backscatter had an RMSE of 3.4 dB, while the retrieved SM had an RMSE of 0.11 m³ /m³ when compared with the SMAPEx-4 data set.